Geometric and Kinematic Parameters of Sensing Tips for the Soil Strength Recording
Article Sidebar
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
ADAMCHUK, V.I.; MORGAN, M.T.; SUMALI, H.: “Application of a strain gauge array to estimate soil mechanical impedance on–the–go”,
Transactions of the ASAE, 44(6): 1377–1383, 2001, ISSN: 0001-2351, 2151-0059, DOI: 10.13031/2013.7000.
ADAMCHUK, V.I.; SUDDUTH, K.A.; INGRAM, T.J.; CHUNG, S.-O.: “Comparison of Two Alternative Methods to Map Soil Mechanical
Resistance On-the-Go”, [en línea], En: ASAE Annual Meeting, Ed. American Society of Agricultural and Biological Engineers, Paper
number 061057, 2006, DOI: 10.13031/2013.20587, Disponible en: http://elibrary.asabe.org/abstract.asp?JID=5&AID=20587&CID=por
&T=1, [Consulta: 26 de noviembre de 2016].
ALIHAMSYAH, T.; HUMPHRIES, E.G.; BOWERS, C.G.: “A technique for horizontal measurement of soil mechanical impedance”, Transactions
of the ASAE, 33(1): 0073-0077, 1990, ISSN: 2151-0059, DOI: 10.13031/2013.31296.
ANDRADE-SÁNCHEZ, P.; UPADHYAYA, S.K.; JENKINS, B.M.: “Development, Construction, and Field Evaluation of a Soil Compaction
Profile Sensor”, Transactions of the ASABE, 50(3): 719-725, 2007, ISSN: 2151-0040, DOI: 10.13031/2013.23126.
ASAE: Procedures for Using and Reporting Data Obtained with the Soil Cone Penetrometer, [en línea], no. ASAE EP542, Inst. ASAE, St.
Joseph, Mich., USA, febrero de 1999, Disponible en: https://elibrary.asabe.org/abstract.asp?aid=44192&redir=[confid=s2000]&redirT
ype=standards.asp&dabs=Y, [Consulta: 26 de noviembre de 2016].
ASAE; ASABE: Soil Cone Penetrometer, [en línea], no. S313.3 (R2013), Inst. ASABE, St. Joseph, Mich., USA, p. 3, 2 de enero de 1999, Disponible
en: http://www.techstreet.com/standards/asae-asabe-s313-3-r2013?product_id=1775024, [Consulta: 26 de noviembre de 2016].
CHUKWU, E.; BOWERS, C.G.: “Instantaneous multiple-depth soil mechanical impedance sensing from a moving vehicle”, Transactions of
the ASAE, 48(3): 885-894, 2005, ISSN: 2151-0059, DOI: 10.13031/2013.18492.
CHUNG, S.-O.; SUDDUTH, K.A.; PLOUFFE, C.; KITCHEN, N.R.: “Evaluation of an On-the-go Soil Strength Profile Sensor Using Soil Bin
and Field Data”, [en línea], En: ASAE Annual Meeting, Ed. American Society of Agricultural and Biological Engineers, Paper Number
, 2004, DOI: 10.13031/2013.16137, Disponible en: http://elibrary.asabe.org/abstract.asp?JID=5&AID=16137&CID=can2004&T=1,
[Consulta: 26 de noviembre de 2016].
GLANCEY, J.; UPADHYAYA, S.K.; CHANCELLOR, W.J.; RUMSEY, J.W.: “Prediction of agricultural implement draft using an instrumented
analog tillage tool”, Soil and Tillage Research, 37(1): 47-65, 1996, ISSN: 0167-1987, DOI: 10.1016/0167-1987(95)00507-2.
GONZÁLEZ, C.O.; IGLESIAS, C.C.E.; HERRERA, S.M.; LÓPEZ, B.E.; SÁNCHEZ, I.Á.: “Efecto de la humedad y la presión sobre el suelo
en la porosidad total de un Rhodic Ferralsol”, Revista Ciencias Técnicas Agropecuarias, 17(2): 50–54, 2008, ISSN: 2071-0054.
HALL, H.; RAPER, R.L.; GRIFT, T.; REEVES, D.: “Development of an on-the-fly mechanical impedance sensor and evaluation in a coastal
plains soil”, [en línea], En: XV International Soil Tillage Research Organization Conference, Ed. Institute of Soil Science, Ft. Worth, TX,
, Disponible en: https://www.ars.usda.gov/ARSUserFiles/60100500/csr/ResearchPubs/raper/raper_00b.pdf.
HALL, H.E.; RAPER, R.L.: “Development and concept evaluation of an on-the-go soil strength measurement system”, Transactions of the
ASAE, 48(2): 469-477, 2005, ISSN: 2151-0059, DOI: 10.13031/2013.18311.
HEMMAT, A.; KHORSANDY, A.; MASOUMI, A.A.; ADAMCHUK, V.I.: “Influence of failure mode induced by a horizontally operated
single-tip penetrometer on measured soil resistance”, Soil and Tillage Research, 105(1): 49-54, 2009, ISSN: 0167-1987, DOI: 10.1016/j.
still.2009.05.003.
HERNÁNDEZ, J.A.; CABRERA, R.A.; BORGES, B.Y.; VARGAS, B.D.; BERNAL, F.A.; MORALES, D.M.; ASCANIO, G.M.O.: “Degradación
de los suelos Ferralíticos Rojos Lixiviados y sus indicadores de la Llanura Roja de La Habana”, Cultivos Tropicales, 34(3): 45-51,
, ISSN: 0258-5936.
HERNÁNDEZ, J.A.; PÉREZ, J.M.; BOSCH, D.; RIVERO, L.; CAMACHO, E.; RUÍZ, J.; SALGADO, E.J.; MARSÁN, R.; OBREGÓN, A.;
TORRES, J.M.; GONZÁLES, J.E.; ORELLANA, R.; PANEQUE, J.; RUIZ, J.M.; MESA, A.; FUENTES, E.; DURÁN, J.L.; PENA, J.;
CID, G.; PONCE DE LEÓN, D.; HERNÁNDEZ, M.; FRÓMETA, E.; FERNÁNDEZ, L.; GARCÉS, N.; MORALES, M.; SUÁREZ, E.;
MARTÍNEZ, E.: Nueva versión de clasificación genética de los suelos de Cuba, Ed. AGROINFOR, La Habana, Cuba, 64 p., 1999, ISBN:
-246-022-1.
HERRERA, S.M.; IGLESIAS, C.C.; LARA, C.D.; GONZÁLEZ, C.O.; LÓPEZ, B.E.: “Desarrollo de un sensor para la medición continúa de
la compactación del suelo”, Revista Ciencias Técnicas Agropecuarias, 20(1): 06-11, 2011, ISSN: 2071-0054.
KHALILIAN, A.; HAN, Y.J.; DODD, R.B.; SULLIVAN, M.J.; GORUCU, S.; KESKIN, M.: “A Control System for Variable Depth Tillage”,
[en línea], En: ASAE International Meeting, Ed. ASAE, At Chicago, Illinois, USA, 29 de julio de 2002, Disponible en: https://www.researchgate.
net/publication/272168320_A_Control_System_ for_Variable_Depth_Tillage, [Consulta: 26 de noviembre de 2016].
MARTÍNEZ, R.A.; RODRÍGUEZ, P.R.; PÉREZ, S.A.: “Sensoramiento del estado de compactación del suelo mediante un campo magnético
variable”, Revista Ciencias Técnicas Agropecuarias, 20(1): 25-30, 2011, ISSN: 2071-0054.
MOUAZEN, A.M.; ANTHONIS, J.; SAEYS, W.; RAMON, H.: “An Automatic Depth Control System for Online Measurement of Spatial
Variation in Soil Compaction, Part 1: Sensor Design for Measurement of Frame Height Variation from Soil Surface”, Biosystems Engineering,
(2): 139-150, 2004, ISSN: 1537-5110, DOI: 10.1016/j.biosystemseng.2004.06.005.
OFICINA NACIONAL DE NORMALIZACIÓN: Geotecnia. Determinación del contenido de humedad de los suelos y rocas en el laboratorio,
no. NC 67, Sustituye a las NC 54-236:83 y NC 54-353:86, 2000.
RAPER, R.L.; REEVES, D.W.; SHAW, J.N.; VAN SANTEN, E.; MASK, P.L.: “Benefits of site-specific subsoiling for cotton production in
Coastal Plain soils”, Soil and Tillage Research, 96(1-2): 174-181, 2007, ISSN: 0167-1987, DOI: 10.1016/j.still.2007.05.004.
RAPER, R.L.; SCHWAB, E.B.; DABNEY, S.M.: “Measurement and variation of site-specific hardpans for silty upland soils in the Southeastern
United States”, Soil and Tillage Research, 84(1): 7-17, 2005, ISSN: 0167-1987, DOI: 10.1016/j.still.2004.08.010.