Mitigation of Dynamic Stresses of a Ball Mill Using Rubber Coatings
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
BOND, F.C.: “Crushing and Grinding Calculations”, British Chemical Engineering, 6(1): 378-391, 543-548, 1960, ISSN: 0007-0424.
BUDYNAS, R.G.; NISBETT, J.K.: Shigley’s Mechanical Engineering Design, Ed. Mc Graw-Hill, México, DF, 2015, ISBN: 13: 978-0073398204.
DUDA, W.H.: Manual tecnológico del cemento, Ed. Reverte, México, DF, 352 p., 2003, ISBN: 978-84-7146-095-0.
FLORES, J.E.A.; LI, Q.M.; SHEN, L.: “Numerical Simulations of Quasi-Static Indentation and Low Velocity Impact of Rohacell 51 WF Foam”, International Journal of Computational Methods, 11: 1 – 12, 2014, ISSN: 0219-8762.
GILARDI, G.; SHARF, I.: “Literature Survey of Contact Dynamics Modelling”, Mechanism and Machine Theory, 37: 1213–1239, 2002, ISSN: 0094-114X.
GOLDSMITH, W.: Impact: The Theory and Physical Behavior of Colliding Solids, Ed. Edward Arnold Publishers Ltd., London, U K, 1960, ISBN: 0-486-42004-3.
HERTZ, H.: “Uber die Beruhung Fester Elastischer Korper”, L. Reine Angewandte Mathematik, 92: 156-171, 1882, ISSN: 0075-4102.
KUBAIR, D.V.: “Simulation of Low-velocity Impact Damage in Layered Composites using a Cohesive-based Finite Element Technique”, Defense Science Journal, 54: 571-578, 2004, ISSN: 0011-748X.
MEOA, M.; MORRISA, A.J.; VIGNJEVICA, R.; MARENGOB, G.: “Numerical Simulations of Low-velocity Impact on an Aircraft Sandwich Panel”, Composite Structures, 62: 353 – 360, 2003, ISSN: 0263-8223.
NEIKOV, O.D.; MURASHOVA, I.B.; YEFIMOV, N.A.; NABOYCHENKO, S.: Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Ed. Elsevier, USA, 644 p., 2009, ISBN: 978-0-08-055940-7.
OCAMPO, A.; HERNÁNDEZ, L.H.; URRIOLAGOITIA, G.; FERNÁNDEZ, D.; CERVANTES, R.; FERNÁNDEZ, D.: “Diseño de un Molino para Reciclar Pastas de Freno de Tracto-Camiones Usando el Método de Bond”, Revista Ciencias Técnicas Agropecuarias, 24(3): 45-51, 2015, ISSN: 1010-2760, e-ISSN: 2071-0054.
OCAMPO, A.; HERNÁNDEZ, L.H.; URRIOLAGOITIA, G.; FERNÁNDEZ, D.; FERNÁNDEZ, D.; CERVANTES, R.: “Evaluación de la Integridad Estructural de un Molino de Bolas en Condiciones Estáticas y Dinámicas Usando el Método del Elemento Finito (MEF)”, Revista Ciencias Técnicas Agropecuarias, 25(2): 5-16, 2016, ISSN: 1010-2760, e-ISSN: 2071-0054.
OSORIO, A.; BUSTAMANTE, O.; MARIN, J.M.; RESTREPO, G.: “Evaluación del uso de poliacrilamida como modificador reológico en la molienda de pulpas de cuarzo”, Revista Colombiana de Materiales, (5): 244–249, 2014, ISSN: 2256-1013.
SOLÓRZANO, J.; PEREA, J.; TORO, E.; VANEGAS, O.: “Reducción del impacto ambiental de un residuo peligroso de la industria del cobre”, Revista Colombiana de Materiales, (5): 277–282, 2014, ISSN: 2256-1013.
SUN, Y.; DONG, M.; MAO, Y.; FAN, D.: “Analysis on Grinding media Motion in Ball Mill by Discrete Element Method”, En: 1st International Conference on Manufacturing Engineering, Quality and Production Systems I, pp. 227-231, 2009.
WANG, Y.; MASON, M.T.: “Two Dimensional Rigid-body Collisions with Friction”, Journal of Applied Mechanics, 59: 635–642, 1992, ISSN: 2379-0431.
WANG, Y.; ZHANG, Z.; XU, Y.; XI, Y.: Tensile Fracture Simulation in Rock Using Augmented Virtual Internal Bond Method, Rock Mechanics and Its Applications in Civil, Mining and Petroleum Engineering, Ed. American Society of Civil Engineers, 13-19 p., 2014, ISBN: 978-0-7844-1339.
WILLS, B.: Wills’ Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery, Ed. Butterworth Hein, 2006, ISBN: 978-0-08-097054-7.
WOOD, A.L.: “Uniaxial Extension and Compression in Stress-Strain Relations of Rubber”, Journal of Research of the National Bureau of Standards, 82: 57 – 63, 1977, ISSN: 0160-1741.
YU, Y.S.; ZHAO, Y.P.: “Deformation of PDMS Membrane and Micro-cantilever by a Water Droplet: Comparison between Mooney–Rivlin and Linear Elastic Constitutive Models”, Journal of Colloid and Interface Science, 332: 467–476, 2008, ISSN: 0021-9797.