The Base Cutter of Sugarcane Harvesters: Characteristics, Importance, Problems and Conditioning Factors
Main Article Content
Resumo
A review of specialized literature has been carried out to determine the main characteristics and importance of the base cutter of sugarcane harvesters. This mechanism is of vital importance for the correct cutting of the cane, hence developing an efficient base cutter and finding a reasonable base-cutting mode is key to successful mechanical harvesting. Various kinematic and construction parameters, such as cutting speed, oblique blade angle, cutting disc pitch angle and blade shape, influence the performance of base cutters. As a result of the investigation, the insufficient number of investigations focused on the impact cutting systems receive from dissimilar objects found in the ground was verified. On the other hand, abrasive wear is the main phenomenon that threatens the durability of the cutting segment, as well as the morphological and physiological characteristics of the cane, the correct preparation of the soils, the damages caused by the bad manipulation of the mechanism in the cutting process and the working speed.
Article Details
Este trabalho encontra-se publicado com a Creative Commons Atribuição-NãoComercial 4.0.
Aquellos autores/as que tengan publicaciones con esta revista, aceptan los términos siguientes:
- Los autores/as conservarán sus derechos de autor y garantizarán a la revista el derecho de primera publicación de su obra, el cuál estará simultáneamente sujeto a la Licencia Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) que permite a terceros compartir la obra siempre que se indique su autor y su primera publicación esta revista. Bajo esta licencia el autor será libre de:
- Compartir — copiar y redistribuir el material en cualquier medio o formato
- Adaptar — remezclar, transformar y crear a partir del material
- El licenciador no puede revocar estas libertades mientras cumpla con los términos de la licencia
Bajo las siguientes condiciones:
- Reconocimiento — Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.
- NoComercial — No puede utilizar el material para una finalidad comercial.
- No hay restricciones adicionales — No puede aplicar términos legales o medidas tecnológicas que legalmente restrinjan realizar aquello que la licencia permite.
- Los autores/as podrán adoptar otros acuerdos de licencia no exclusiva de distribución de la versión de la obra publicada (p. ej.: depositarla en un archivo telemático institucional o publicarla en un volumen monográfico) siempre que se indique la publicación inicial en esta revista.
- Se permite y recomienda a los autores/as difundir su obra a través de Internet (p. ej.: en archivos telemáticos institucionales o en su página web) antes y durante el proceso de envío, lo cual puede producir intercambios interesantes y aumentar las citas de la obra publicada. (Véase El efecto del acceso abierto).
Referências
AUSTRALIA, S. R.: Harvesting Best Practice Manual. In Technical publication MN14001, 2014 . www.sugarresearch.com.au
BAI, J., MA, S., KE, W., WANG, F., XING, H., MA, J., & GAO, S.: Experimental Research On Sugarcane Under-The-Ground Basecutting. American Society of Agricultural and Biological Engineers, 36(3), 331-339, 2020. https://doi.org/10.13031/aea.13504
BRAUNBECK, O. A., & MAGALHÃES, P. S. G.: Seguimento do perfil do solo no corte e/ou levantamento de produtos agrícolas rasteiros. Revista Brasileira de Engenharia Agrícola e Ambiental, 6(1), 151-158, 2002.
CANNAVAM, R. T. C., & RIPOLI, M. L. C.: Biomassa da cana-de-açúcar: colheita, energia e ambiente. 2.ed. Piracicaba, 302, 2002.
COOPERSUCAR: Colheita mecanizada de cana picada: avaliação de perdas invisíveis e estilhaços nos sistemas das colhedoras, 1989.
CRUZ, E. Z.: Estudio sobre la Cosecha de la Cana de Azucar. Distribuidora Venezolana de Azucares, 173-181, 1976.
FAOSTAT: Sugarcane production in the world: 1950-2020, 2022 https://www.fao.org/faostat/es/#data/QCL
FISCHER, G., TEIXEIRA, E., HIZSNYIK, E. T., & VELTHUIZEN, H. V.: Chapter 2: Land use dynamics and sugarcane production. In Sugarcane Ethanol: Contributions to Climate Change Mitigation and the Environment. Wageningen Academic, 2008. https://doi.org/10.3920/978-90-8686-652-6
FURLANI NETO, V. L.: Incidência de Matéria Estranha e Perdas no Campo nos processos de corte manual e com Colhedoras Amontoadas em Cana-de Açúcar (Saccharum spp) [Tesis de Doctorado, Universidade de São Paulo], 1984.
FURLANI NETO, V. L.: Sistematização e adequação de áreas e máquinas para colheita mecanizada, Reunião Agrícola Fermentec, Piracicaba, 2000.
GARSON, C. A.: Control of harvester base cutter height. Proceedings of Australian Society of Sugar CaneTechnologists, 1, 156-162, 1992.
GONZÁLEZ, J. M.: Evaluación del Corte Basal de la Cosechadora C-4000 con cuchillas de tres filos [Tesis de Maestría, Universidad de Holguín], 2011.
GUPTA, C. P., & ODUORI, M. F.: Design of the Revolving Knife-type Sugarcane Basecutter. Transactions of the ASAE, 35(6), 1747-1752, 1992. https://doi.org/10.13031/2013.28793
KE, W., MA, S., WANG, F., YANG, G., XING, H., PAN, Y., & GUO, B.: Experimental Research on Sugarcane Under-the-Ground Basecutting. 2018 ASABE Annual International Meeting, 2018. https://doi.org/10.13031/aim.201800481
KROES, S., & HARRIS, H. D.: Knockdown causes major damage to cane during harvesting. Proceedings of Australian Society of Sugar Cane Technologists,, 1, 1996.
LIU, Q., OU, Y., QING, S., & SHIXING, H.: High-speed bphotography analysis on the damage process in cutting sugarcane stalk with smooth-edge blade. Transactions of the CSAE, 38(10), 31-35, 2007.
LIU, Q., OU, Y., QING, S., & SONG, C.: Cutting force test of sugarcane stalk. Transactions of the CSAE, 23(7), 90-94, 2007.
LIU, Q., OU, Y., QING, S., & WANG, W.: Stubble damage of sugarcane stalks in cutting test by smooth-edge blade. Transactions of the CSAE, 28(3), 103-107, 2007.
MA, S., KARKEE, M., SCHARF, P. A., & ZHANG, Q.: Sugarcane Harvester Technology: A Critical Overview. American Society of Agricultural and Biological Engineers, 30(5), 727-739, 2014. https://doi.org/DOI10.13031/aea.30.10696
MAGALHÃES, P. S. G., & BRAUNBECK, O. A.: Ingeniería rural y mecanización agraria en el ámbito latinoaméricano, 1998.
MELLO, R. D. C., & HARRIS, H.: Cane damage and mass losses for conventional and serrated basecutter blades Proceedings of the 2000 Conference of the Australian Society of Sugar Cane Technologists held at Bundaberg, Queensland, Australia, 2000.
MOMIN, M. A., WEMPE, P. A., GRIFT, T. E., & HANSEN, A. C.: Effects of four base cutter blade designs on sugarcane stem cut quality. Transactions of the ASABE, 60(5), 1551-1560, 2017. https://doi.org/10.13031/trans.12345
OMETTO, M. C.: Desempenho da Colhedora Engeagro. Revista STAB, 12(3), 21-24. 1994.
PATIL, M., & PATIL, P. D.: Optimization of blade angle for cutting system of sugar cane harvester. International Indexed & Refereed Research Journal, 42(4), 49-52, 2013.
PÉREZ-REYES, R. A., DAQUINTA-GRADAILLE, L. A., BONILLA-ROCHA, J. D., RECAREY-MORFA, C. A., SÁNCHEZ-NUMA, A., & GÓMEZ-BRAVO, J. E.: Numerical Model for Sugarcane Base Cutting. Revista Ciencias Técnicas Agropecuarias, 31(2), 2022. https://www.redalyc.org/journal/932/93271464002/93271464002.pdf
PÉREZ, R. A. R., DAQUINTA, L. A. G., BONILLA, J. D. R., RECAREY, C. A. M., RODRÍGUEZ, O. H. A., & ÁGUILA, J. G.: Fundamentos, problemática y repercusión del proceso de corte base en la cosecha mecanizada de la caña de azúcar. Revista Ciencias Técnicas Agropecuarias (Cuba), 31(1), 67-78, 2022. https://www.researchgate.net/publication/359722056
PUPO, J. R. P., ALONSO, J. R. S., GUERRERO, J. N. P., & MARIÑO, C. J. S.: Valoración de las Cargas en la Cosechadora de Caña de Azúcar en las Condiciones de Cuba. European Scientific Journal, 15(21), 2019. https://doi.org/10.19044/esj.2019.v15n21p294
QING, S., QU, Y., & LIU, Q.: Internal forces and distortions of sugarcane stalks in the condition of soil support. Journal of Huazhong Agricultural University, 10, 109-113, 2005.
QIU, M., MENG, Y., LI, Y., & SHEN, X.: Sugarcane stem cut quality investigated by finite element simulation and experiment. Biosystems engineering, 206, 135-149, 2021. https://doi.org/10.1016/j.biosystemseng.2021.03.013
REMUS, J. S: Teoría y cálculo de máquinas agrícolas. Editorial Pueblo y Educación, 1999.
RIDGUE, D. R.: Minimizing the problem of soil in chopper harvester cane. Proceedings of International Society of Sugar Cane Technologists, 2, 315-323, 1980.
RIPOLI, M. L. C., RIPOLI, T. C. C., & OLIVEIRA, M. A: Evalution of two different base cutters in green cane mechanical harvest. ASAE ANNUAL INTERNATIONAL MEETING, Las Vegas, 2003.
RIZO, L. A. A.: Optimización de la cosecha mecanizada de caña de azúcar. Apuntes básicos de mejoramiento. Conferencia Red agrícola, Trujillo, Perú, 2018. https://www.redagricola.com/pe/assets/uploads/2018/08/1--luis-armando-abadia-optimizacion-de-cosecha-mecanica-de-cana-de-azucar.pdf
SALVI, J. V.: Qualidade do corte de base de colhedoras de cana-de-açúcar [Tesis de Maestría, Universidade de São Paulo], 2006.
SALVI, J. V., MILAN, M., SARRIES, G. A., SOUZA, A. B. M., NAGUMO, G. K., & MATOS, M. A.: Avaliação dos sistemas de corte basal de uma colhedora de cana de açúcar Congresso Brasileiro de Engenharia Agrícola, Canoas, .
TOLEDO, A. D., SILVA, R. P. D., & FURLANI, C. E. A.: Quality of cut and basecutter blade confi guration for the mechanized harvest of green sugarcane. Scientia Agricola, 70, 777-780, 2013. https://www.scielo.br/j/sa/a/LNNjwPJvDsYNKBvqvWQ9cvS/?format=pdf&lang=en
VOLPATO, C. E. S.: Otimização de um Cortador de Base Flutuante para Seguimento do Perfil de Solo em Colhedoras de Cana-de-Açúcar [Tesis de doctorado, Universidade Estadual de Campinas]. Campinas, SP, 2001.
ZHOU, J., ZHU, Y., LI, S., LU, A., HE, Y., XUE, B., & PAN, Y.: Study on the effect of cutting depth of cutter disk on ratoon damage rate. J. Agric. Mech. Res., 2, 186-189, 2015.