Determinación experimental del esfuerzo de adherencia en la interface suelo-metal
Article Sidebar
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
ALUKO, O., B.; CHANDLER H., W: “Characterization and Modelling of Brittle Fracture in Two-dimensional Soil Cutting”, Biosystems Engineering, ISSN: 1537-5110, E-ISSN: 1537-5129, 88(3): 369–381, 2004.
BRADFORD, J., M: ¨The penetration resistance in a soil with well-defined structural units¨, Soil science Society American Journal, ISSN 1537-5110, DOI: 10.1016/j.biosystemseng.2004.03.009, DOI: 10.2136/sssaj1980.03615995004400030034x, 44(3): 601-606, 1980.
DURAIRAJ, C., D.; BALASUBRAMANIAN, M: ¨Influence of tool angles and speed on the soil reactions of a bent leg plough in two soils¨, Soil Tillage, DOI: 10.1016/S0167-1987(97)00048-2, 44: 37-150, 1997.
DURÁN, G. H., M. ¨Efecto de la humedad en la resistencia mecánica de un suelo franco¨, Journal of Terramechanics, ISSN: 0022-4898, 20(3): 227-234, 2002.
GONZÁLEZ, O.; IGLESIAS, C.; HERRERA, M.; LÓPEZ, E.; SÁNCHEZ, A: “Efecto de la humedad y la presión sobre el suelo en la porosidad total de un Rhodic Ferralsol”. Revista Ciencias Técnicas Agropecuarias, ISSN: 1010-2760, E-ISSN: 2071-0054, 17(2): 50-54, 2008.
HERMAWAN, W.; YAMAZAKI, M.; OIDAH, A: “Experimental analysis of soil reaction on a lug of a movable lug Wheel”, Journal of Terramechanics, DOI: 10.1016/S0022-4898(98)00017-2, 35(2): 119-135, 1998.
HERNÁNDEZ, A.; PÉREZ, J.; BOSCH, D.; RIVERO, L.; CAMACHO, E.: Nueva versión de clasificación genética de los suelos de Cuba., ed. L.L Barcaz, Ed. AGRINFOR, t. 1, ISBN-959-246-022-1, La Habana, Cuba, 1999.
HERRERA, S., M.; IGLESIAS C., C.; GONZÁLEZ C., O.; LÓPEZ B., E.; SÁNCHEZ I., A: “Propiedades mecánicas de un Rhodic Ferralsol requeridas para la simulación de la interacción suelo implemento de labranza mediante el Método de elementos Finitos: Parte II”, Revista Ciencias Técnicas Agropecuarias, ISSN: 1010-2760, E-ISSN: 2071-0054, 17(4): 5, 2008.
MAKANGA, J., T.; SALOKHE V., M.; GEE-CLOUGH, D: “Effects of tine rake angle and aspect ratio on soil reactions in dry loam soil”, Journal of Terramechanics, DOI: 10.1016/S0022-4898(98)00003-2, 34(4): 235-250, 1997.
MOUAZEN, M., A.; DUMONT K., M.; RAMON K., H: “Two-dimensional prediction of spatial variation in topsoil compaction of a sandy loam field-based on measured horizontal force of compaction sensor, cutting depth and moisture content”, Soil & Tillage Research, ISSN: 0167-1987, 74(1): 91–102, 2003.
ONWUALU, A., P.; WATTS K., C: “Draught and vertical forces obtained from dynamic soil cutting by plane tillage tools”, Soil & Tillage Research, DOI: 10.1016/S0167-1987(98)00127-5, 48(4): 239-253, 1998.
OWENDE, O., P.; WARD M., M: “Characteristic loading of light mould board ploughs at slow speeds”, Journal of Terramechanics, DOI: 10.1016/0022-4898(96)00011-0, 33(1): 29-53, 1996.
RAJARAM, G.; ERBACH D., C: “Effect of wetting and drying on soil physical properties”, Journal of Terramechanics, DOI: 10.1016/S0022-4898(98)00030-5, 36: 39-49, 1999.
TADESSE, D: Evaluating DEM results with perspectives of load-soil interaction, Disertación en la Universidad Wageningen, ISBN 90-8504-011-6, June. 2004, Wageningen, Low Countries, 2004.
WANG, L., X.; YAMAZAKI, M.; TANAKA, T: “Characteristics of soil reactions of an open Lugged wheel under paddy soil conditions”, Journal of Terramechanics, DOI: 10.1016/0022-4898(95)00011-9, 32(3): 115-125, 1995.
WANG, L., X.; YAMAZAKI, M.; TANAKA, T: “Characteristics of soil reactions of an open Lugged wheel under paddy soil conditions”, Journal of Terramechanics, DOI: 10.1016/0022-4898(95)00011-9, 32(3): 115-125, 1995.
ZHANG, C.; ARAYA K: “A Three-stage Soil Layer Mixing Plough for the Improvement of Meadow Soil. Part 1: Mechanical Properties of Soils”, Journal Agriculture Engineer Research, DOI: 10.1006/jaer.2000.0644, 78(3): 253-260, 2001.