Model and Software for the Regulation of an Inclined Belt Sorter for Agricultural Products
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
ALVARADO, A.: Maquinaria y mecanización agrícola, Inst. EUNED, San José, Costa Rica, 2004.
BARITELLE, A.; HYDE, G.; THORNTON, R.; BAJEMA, R.: “A classification system for impact-related defects in potato tubers”, American Journal of Potato Research, 77(3): 143-148, 2000, ISSN: 1099-209X.
BENTINI, M.; CAPRARA, C.; MARTELLI, R.: “Harvesting damage to potato tubers by analysis of impacts recorded with an instrumented sphere”, Biosystems engineering, 94(1): 75-85, 2006, ISSN: 1537-5110.
BUITRAGO, G.: Determinación de las características físicas y propiedades mecánicas de la papa cultivada en Colombia, Inst. Universidad Nacional de Colombia, Colombia, 2004.
ESCALONA, M.R.; ELORZA, P.B.: “Daños mecánicos en patata: evaluación mediante productos electrónicos”, Tierras de Castilla y León: Agricultura, (142): 94-100, 2008, ISSN: 1889-0776.
FAO: Alimentar al mundo”, Anuario Estadístico de la FAO 2014 “La Alimentación y la Agricultura en América Latina y el Caribe”, Ed. FAO, Santiago de Chile, Chile, 90-100 p., 2014, ISBN: 978-92-5-308149-3.
IGLESIAS, C.: Administración de las Máquinas Agrícolas, Ed. Universidad Autónoma Chapingo, Chapingo ed., vol. II, Chapingo Texcoco, Edo. México, 119-120 p., 2002.
INFOAGRO: Infoagro Systems, S.L., [en línea], Infoagro.com.Ingemecanica, 2018, Disponible en: http://ingemecanica.com/tutorialsemanal/tutorialn121.html.
LÓPEZ, J.E.G.; CHAVEZ, J.C.; SÁNCHEZ, A.K.J.: “Modelado de una red de sensores y actuadores inalámbrica para aplicaciones en agricultura de precisión”, En: 2017 IEEE Mexican Humanitarian Technology Conference (MHTC), Ed. IEEE, pp. 109-116, 2017, ISBN: 1-5090-6450-8.
MCGARRY, A.; HOLE, C.; DREW, R.; PARSONS, N.: “Internal damage in potato tubers: a critical review”, Postharvest Biology and Technology, 8(4): 239-258, 1996, ISSN: 0925-5214.
MESEMOV, G.C.: “Development of elevator for potato harvester”, Transaction of ASAE, 28, 1987, ISSN: 2151-0032, e-ISSN: 2151-0040.
MINAG-CUBA: Instructivo Técnico para el Cultivo de la Papa, Ed. Minag-Cuba, Instituto de Investigaciones Hortícolas “Liliana Dimitrova”, Quivican, La Habana, Cuba, 1997.
MONTESDEOCA, F.; MORA, C.; BENÍTEZ, B.; NARVÁEZ, P.: Manual de control interno de calidad (CIC) en tubérculo-semilla de papa, [en línea], Inst. INIAP, COSUDE, Papa Andina, Quito, Ecuador, 39 p., 2006, Disponible en: http://cipotato.org/es/sin-categorizar/manejo-del-tuberculo-semilla/#sthash. M1FIU1Pj.dpuf.
PANEQUE, R.P.: Transportadores en la Agricultura, Ed. Departamento de Ediciones del ISCAH, ENPES, primera ed., La Habana, Cuba, 276 p., 1988.
PANEQUE, R.P.; LÓPEZ, C.G.; MAYANS, C.P.; MUÑOZ, G.F.; GAYTÁN, R.J.G.; ROMANTCHIK, K.E.: Fundamentos Teóricos y Análisis de Máquinas Agrícolas, Ed. Universidad Autónoma Chapingo, vol. 1, Chapingo, Texcoco, México, 456 p., 2018, ISBN: 978-607-12-0532-2.
PETERS, R.: “Damage of potato tubers, a review”, Potato Research, 39(4): 479-484, 1996, ISSN: 0014-3065.
POLANCO, P.M.F.: Maquinaria y Mecanización Agrícola, Bogota, Colombia, 2007.
RAMOS, E.M.; BARREIRO, E.P.; MACÍAS, S.I.: “Daños mecánicos en patata y evaluación mediante productos electrónicos”, Revista Ciencias Técnicas Agropecuarias, 19(1): 18–23, 2010, ISSN: 1010-2760, e-ISSN: 2071-0054.
SABLIKOV, M.V.: “Fundamento de la teoría y el cálculo tecnológico”, En: Máquinas Agrícolas Parte II, Editorial KOLOS, Moscú, Rusia. URSS, pp. 285-286, 1978.