Model and Software for the Parameters Calculation in Centrifugal Disk of Fertilizer Spreaders
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
APHALE, A.; BOLANDER, N.; PARK, J.; SHAW, L.; SVEC, J.; WASSGREN, C.: “Granular fertilizer particle dynamics on and off a spinner spreader”, Biosystem Engineering, 85: 319-329, 2003, ISSN: 1537-5110, e-ISSN: 1537-5129.
CEROVIĆ, V.B.; DRAGAN, V.P.; RADE, L.R.; SAŠA, R.B.; VUKOVIĆ, A.: “On the Fertilizer Particle Motion Along the Vane of a Centrifugal Spreader Disc Assuming Pure Sliding of the Particle”, Journal of Agricultural Sciences, 63(1): 83-97, 2018, ISSN: 0021-8596, DOI: https://dx.doi.org/10.2298/JAS1801083C. UDC: 631.33.022.
COOL, R.S.; PIETERS, G.J.; ACKER, V.J.; VAN DEN, B.J.; MERTENS, C.K.; NUYTTENS, R.E.D.; VAN DE GUCHT, C.T.; VANGEYTE, J.: “Determining the effect of wind on the ballistic flight of fertilizer particles”, Biosystems Engineering, 151: 425-434, 2016, ISSN: 1537-5110, e-ISSN: 1537-5129.
COOL, R.S.; PIETERS, J.; MERTENS, C.K.; HIJAZI, B.; VANGEYTE, J.: “A simulation of the influence of spinning on the Ballistic flight of spherical fertilizer grains”, Computers and Electronics in Agriculture, 105: 121-131, 2014, ISSN: 0168-1699.
DINTWA, E.; TIJSKENS, E.; OLIESLAGERS, R.; DE BAERDEMAEKER, J.; RAMON, H.: “Calibration of a spinning disc spreader simulation model for accurate site specific fertilizer application”, Biosystem Engineering, 88: 49-62, 2004, ISSN: 1537-5110, e-ISSN: 1537-5129.
GRIFFIS, C.L.; RITTER, D.W.; MATTHEWS, E.J.: “Simulation of rotary spreader distribution patterns”, Transactions of the ASAE, 26(1): 33-37, 1983, ISSN: 2151-0032.
MENNEL, F.I.; REECE, A.R.: “The theory of the centrifugal distributor: II. Motion on the disc, off–center feed”, Journal of Agricultural Engineering Reearch, 7(4): 345-353, 1962.
OLIESLAGERS, R.; RAMON, H.; DE BAERDEMAEKER, J.: “Calculation of fertilizer distribution patterns from a spinning discspreader by means of a simulation model”, . Journal of Agricultural Engineering Reearch, 63: 137-152., 1996.
TURBIN, B.G.; LURIÉ, A.B.; GRIGORIEV, C.M.; IVANOVICH, Z.M.; MELNIKOV, C.B.: Máquinas Agrícolas. Teoría y Cálculo Tecnológico, Ed. Machinostroienie, En idioma ruso ed., Leningrado, Rusia, 1967.
VAN LIEDEKERKE, P.; THIJSKENS, E.; DINTWA, E.; RIOUAL, F.; VANGEYTE, J.; RAMON, H.: “DEM simulations of the particle flow on a centrifugal fertilizer spreader”, Powder Technology, 190: 346-360, 2009, ISSN: 0032-5910.
VILLETTE, S.; COINTAULT, F.; PIRON, E.; CHOPINET, B.: “Centrifugal Spreading, an Analytical Model for the Motion of Fertiliser Particles on a Spinning Disc”, Biosystem Engineering, 92(2): 157-165, 2005, ISSN: 1537-5110, e-ISSN: 1537-5129.
WALKER, J.T.; GRIFT, T.E.; HOFSTEE, J.W.: “Determining effects of fertiliser particle shape on aerodynamic properties”, Transactions of the ASAE, 40: 21–27, 1997, ISSN: 2151-0032.