Effect of the Geometry and Operational Conditions in the Draft Forces of the Arm of a Vibratory Scarifier

Article Sidebar

PDF HTML XML-JATS EPUB
Keywords:
Finite elements, force of traction, density of mesh, attack angle of wedge

Main Article Content

Luis Orlando Marín-Cabrera
Universidad Agraria de La Habana
Armando Eloy García de la Figal-Costales
Universidad Agraria de La Habana
Arturo Martínez-Rodríguez
Universidad Agraria de La Habana

Abstract

Both draft force and soil breaking up of clods of soil are in function of the kind of tool, geometry and operational conditions. In order to analyze the effect of the conditions of operation (density of mesh) and the geometry (attack angle of wedge) in the tractional force of a vibratory scarifier of curved arm tilling a Rhodic Ferralsol soil , the soil was considered as homogeneous material. The model extended linear Drucker Prager's elastoplastic of constitutive relation was used for this modelation by finite elements and soil-tillage tool interaction was modeled with surface to surface contact and the software Solid Works and its complement simulation were used. When increasing the angle of attack of the wedge, the grade increases in displacement of the particles of soil, both, in the direction of advance of the tool and in vertical sense, and the values of the tensions of contact in the nodes grow, mainly located in the tip of the tillage tool of cultivation and the plane of the undersurface of the deformed soil prism.

Article Details

How to Cite
Marín-Cabrera, L. O., García de la Figal-Costales, A. E., & Martínez-Rodríguez, A. (2020). Effect of the Geometry and Operational Conditions in the Draft Forces of the Arm of a Vibratory Scarifier. Revista Ciencias Técnicas Agropecuarias, 29(2). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/1251
Issue
Vol. 29 No. 2 (2020): April-May-June
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ABO, A.A.; EID, M.; AOUES, Y.; EL-HAMI, A.; KHARMANDA, M.G.; MOUAZEN, A.M.: “Theoretical analysis of the spatial variability in tillage forces for fatigue analysis of tillage machines”, Journal of Terramechanics, 48(4): 285-295, 2011, ISSN: 0022-4898.

ABO, E.M.; HAMILTON, R.; BOYLE, J.: “Simulation of soil–blade interaction for sandy soil using advanced 3D finite element analysis”, Soil and Tillage Research, 75(1): 61-73, 2004, ISSN: 0167-1987.

ABO, E.M.; HAMILTON, R.; BOYLE, J.T.: “3D Dynamic analysis of soil–tool interaction using the finite element method”, Journal of Terramechanics, 40(1): 51-62, 2003, ISSN: 0022-4898.

ABU, H.N.H.; REEDER, R.C.: “A nonlinear 3D finite element analysis of the soil forces acting on a disc plow”, Soil & Tillage Research, (74): 115–124, 2003, ISSN: 0167-1987.

AHMADI, I.: “Development and evaluation of a draft force calculator for moldboard plow using the laws of classical mechanics”, Soil and Tillage Research, 161: 129-134, 2016, ISSN: 0167-1987.

AL-JANOBI, A.; AL-SUHAIBANI, S.: “Draft of primary tillage implements in sandy loam soil”, Applied engineering in agriculture, 14(4): 343-348, 1998.

ARMIN, A.; FOTOUHI, R.; SZYSZKOWSKI, W.: “On the FE modeling of soil–blade interaction in tillage operations”, Finite elements in analysis and design, 92: 1-11, 2014, ISSN: 0168-874X.

ARMIN, A.; FOTOUHI, R.; SZYSZKOWSKI, W.: “3D Finite Element Analysis for Mechanics of Soil-Tool Interaction”, World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9(5): 843-848, 2015.

BENTAHER, H.; IBRAHMI, A.; HAMZA, E.; HBAIEB, M.; KANTCHEV, G.; MAALEJ, A.; ARNOLD, W.: “Finite element simulation of moldboard–soil interaction”, Soil and Tillage Research, 134: 11-16, 2013, ISSN: 0167-1987.

CHI, L.; KUSHWAHA, R.: “A non-linear 3-D finite element analysis of soil failure with tillage tools”, Journal of Terramechanics, 27(4): 343-366, 1990, ISSN: 0022-4898.

DAVOUDI, S.; ALIMARDANI, R.; KEYHANI, A.; ATARNEJAD, R.: “A two dimensional finite element analysis of a plane tillage tool in soil using a non-linear elasto-plastic model”, American-Eurasian J. Agric. & Environ. Sci, 3(3): 498-505, 2008.

DE LA ROSA, A.A.A.: Ajuste del modelo de Drucker Prager extendido para la simulación de la respuesta mecánica de un vertisol mediante el método de elementos finitos, Universidad Central de las Villas, PhD. Thesis, Santa Clara, Villa Clara, Cuba, 2014.

EHRHARDT, J.P.; GRISSO, R.; KOCHER, M.; JASA, P.; SCHINSTOCK, J.: “Using the Veris electrical conductivity cart as a draft predictor”, En: ASAE Annual International Meeting, Paper, pp. 49085-9659, 2001.

ELBASHIR, M.A.; ZHAO, Z.; HEBEIL, E.A.; LI, X.Y.: “Comparative Finite Element Analysis of the Effects of Tillage Tool Geometry on Soil Disturbance and Reaction Forces”, Research Journal of Applied Sciences, Engineering and Technology, 7(15): 3145-3149, 2014, ISSN: 2040-7459; e-ISSN: 2040-7467.

FORMATO, A.; FAUGNO, S.; PAOLILLO, G.: “Numerical simulation of soil-plough mouldboard interaction”, Biosystems engineering, 92(3): 309-316, 2005, ISSN: 1537-5110.

GARCÍA DE LA FIGAL, C.A.E.: Maquinaria Agrícola II, Inst. Universidad Agraria de La Habana, Facultad de Ciencias Técnicas, Departamento de Ingeniería, Apuntes de clases, San José de las Lajas, Mayabeque, Cuba, 2013.

GILL, W.; VANDENBERG, G.: “Soil dynamics in tillage and traction. Agriculture Handbook 316”, 1968.

GONZÁLEZ, O.: Modelación de la compactación provocada, por el tráfico de los neumáticos de los vehículos agrícolas, en suelos en condiciones de laboratorio, Universidad Agraria de La Habana (UNAH), PhD. Thesis, San José de Las Lajas, Mayabeque, Cuba, 134 p., 2008.

GRISSO, R.; YASIN, M.; KOCHER, M.: “Tillage implement forces operating in silty clay loam”, Transactions of the ASAE (USA), 1996, ISSN: 0001-2351.

HERRERA, S.M.: Simulación del comportamiento mecánico de los suelos Ferralíticos rojos mediante el método de elementos finitos, 107pp, Universidad Agraria de La Habana, PhD. Thesis, San José de las Lajas. Habana, Cuba, 109 p., 2006.

HETTIARATCHI, D.R.P.; WITNEY, B.D.; REECE, A.R.: “The calculation of passive pressure in two-dimensional soil failure”, J. Agric.Eng.Res, 11: 89–107, 1966.

IBRAHMI, A.; BENTAHER, H.; HBAIEB, M.; MAALEJ, A.; MOUAZEN, A.M.: “Study the effect of tool geometry and operational conditions on mouldboard plough forces and energy requirement: Part 1. Finite element simulation”, Computers and Electronics in Agriculture, 117: 258-267, 2015, ISSN: 0168-1699.

JAFARI, R.; TAVAKOLI, T.; MINAEE, S.; RAOUFAT, M.: “Large deformation modeling in soil-tillage tool interaction using advanced 3D nonlinear finite element approach”, En: Proceedings of the 6th WSEAS International Conference on Simulation, Modelling and Optimization, Ed. Citeseer, p. 6, 2006.

JESHVAGHANI, H.S.; DEHKORDI, S.K.H.; SAMANI, M.F.; DEHKORDI, H.R.; BRANCH, S.: “Comparison and optimization of graphical methods of moldboard plough bottom design using computational simulation”, J. Am. Sci, 9(6): 414-420, 2013.

KUSHWAHA, R.; SHEN, J.: “Finite element analysis of the dynamic interaction between soil and tillage tool”, Transactions of the ASAE, 38(5): 1315-1319, 1995.

LI, M.; CHEN, D.; ZHANG, S.; TONG, J.: “Biomimeitc design of a stubble-cutting disc using finite element analysis”, Journal of Bionic Engineering, 10(1): 118-127, 2013, ISSN: 1672-6529.

LI, M.; ZHANG, Q.; WANG, H.; SUN, H.; TONG, J.: “A 3D Finite Element Simulation Analysis of the Soil Forces Acting on a Rotary Blade”, Transactions of the ASABE, 58(2): 243-249, 2015.

MOEINFAR, A.; MOUSAVI, S.S.R.; KALANTARI, D.: “Influence of tillage depth, penetration angle and forward speed on the soil/thin-blade interaction force”, Agricultural Engineering International: CIGR Journal, 16(1): 69-74, 2014, ISSN: 1682-1130.

MOITZI, G.; WAGENTRISTL, H.; REFENNER, K.; WEINGARTMANN, H.; PIRINGER, G.; BOXBERGER, J.; GRONAUER, A.: “Effects of working depth and wheel slip on fuel consumption of selected tillage implements”, Agricultural Engineering International: CIGR Journal, 16(1): 182-190, 2014, ISSN: 1682-1130.

PLOUFFE, C.; LAGUË, C.; TESSIER, S.; RICHARD, M.; MCLAUGHLIN, N.: “Moldboard plow performance in a clay soil: simulations and experiment”, Transactions of the ASAE, 42(6): 1531, 1999.

SHRESTHA, D.; SINGH, G.; GEBRESENBET, G.: “PM—Power and Machinery: Optimizing design parameters of a mouldboard plough”, Journal of Agricultural Engineering Research, 78(4): 377-389, 2001, ISSN: 0021-8634.

SONI, P.; SALOKHE, V.; NAKASHIMA, H.: “Modification of a mouldboard plough surface using arrays of polyethylene protuberances”, Journal of Terramechanics, 44(6): 411-422, 2007, ISSN: 0022-4898.

SUN, H.; LI, M.; ZHANG, Q.; WANG, H.; TONG, J.: “A 3D finite element simulation analysis of the soil forces acting on a rotary blade”, Transactions of the ASABE, 58(2): 243-249, 2015, ISSN: 0001-2351.

YONG, R.; HANNA, A.: “Finite element analysis of plane soil cutting”, Journal of terramechanics, 14(3): 103-125, 1977, ISSN: 0022-4898.

Most read articles by the same author(s)

<< < 1 2