Operational Performance of Bean Seeder -Tractor Set in Tillage Systems and Speed Steps

Article Sidebar

PDF PDF (Español (España)) XML-JATS
Published: Jul 18, 2018
Keywords:
energetic demand, traction power, tillage systems, seed

Main Article Content

Yarina M Trujillo Rodríguez
<p>Universidad de Ciego de &Aacute;vila</p>
Haroldo Carlos Fernandes
<p>Universidade Federal de Vi&ccedil;osa</p>
Claudio Pérez Olmos
<p>Universidad de Ciego de &Aacute;vila</p>
José E de Souza Carneiro
<p>Universidade Federal de Vi&ccedil;osa</p>

Abstract

The objective of this work was to evaluate the operational performance of the tractor-bean seeder set considering two tillage systems and two speed steps. The testing was conducted in the experimental Agronomy-Airport Area of the Federal University of Viçosa, located in Viçosa-MG. Two land cultivation systems were introduced: conventional and minimum into a subdivided plots experimental design with two tractor working gears and four replications, totaling 16 experimental plots. The emergence speed index of the plants, the fuel consumption per hour and hectare, force and traction power and consumed energy in MJ·ha-1, in the seeding operation were determined. Processing the results by using an analysis of variance in the software Statistics SPSS 21, did not report significant differences in the emergence speed index of the plants by tillage system and allowed to recommend the use of B1 gear for offering lower power and energy consumption (MJ·ha-1). Fuel consumption per hectare, force and traction power and energy consumption (MJ·ha-1) significantly differed in the two tillage systems, being lower for minimum tillage. The conventional tillage system was the largest consumer of energy.

Article Details

How to Cite
Trujillo Rodríguez, Y. M., Fernandes, H. C., Pérez Olmos, C., & de Souza Carneiro, J. E. (2018). Operational Performance of Bean Seeder -Tractor Set in Tillage Systems and Speed Steps. Revista Ciencias Técnicas Agropecuarias, 27(3). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/985
Issue
Vol. 27 No. 3 (2018): July-August-September
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ALMEIDA, R.A.S.; TAVARES, S.C.A.; SILVA, S. de L.: “Desempenho energético de um conjunto trator-semeadora em função do escalonamento de marchas e rotações do motor”, Revista Agraria, 3(7): 63-70, 2010, ISSN: 1984-2538, DOI: 10.30612/agrarian.v3i7.1086.

ALVES, de S.C.M.; REIS, E.F.; MARÇAL, Q.D.; CECON, P.R.; BAIÃO, V.L.: “Avaliação do desempenho de um conjunto trator-semeadora-adubadora em plantio direto”, Revista Ceres, 50(292): 767-768, 2003, ISSN: 0034-737X.

AMERICAN SOCIETY OF AGRICULTURAL ENGINEERS: Soil cone penetrometer, Inst. ASAE standards, ASAE S313.2, St. Joseph, Michigan, USA, 820-821 p., 1994.

DERPSCH, R.; FRIEDRICH, T.; KASSAM, A.; LI, H.: “Current status of adoption of no-till farming in the world and some of its main benefits”, International Journal of Agricultural and Biological Engineering, 3(1): 1–25, 2010, ISSN: 1934-6344, DOI: 10.3965/j.issn.1934-6344.2010.01.0-0.

EMBRAPA: Manual de métodos de análises do solo, Ed. Centro Nacional de Pesquisa de Solos, M. E. C. Claessen, 2a. ed., ed., Rio de Janeiro, Brasil, 212 p., 1997, ISBN: 85-85864-03-6.

FERNANDES, H.C.; ORLANDO, R.C.; LEITE, D.M.; COSTA, M.M.; FURTADO, J.M.R.: “Demanda energética de um subsolador adaptado para deposição de material poroso em drenos livres”, Revista Engenharia na Agricultura, 20(3): 219-226, 2012, ISSN: 1414-3984.

FURLANI, C.E.A.; PEREIRA DA SILVA, R.; CARVALHO FILHO, A.; CORTEZ, J.W.; CHECCHIO GROTTA, D.C.: “Semeadora-adubadora: exigências em função do preparo do solo, da pressão de inflação do pneu e da velocidade”, Revista Brasileira de Ciência do Solo, 32(1), 2008, ISSN: 1806-9657.

KASPARY, T.E.; LAMEGO, F.P.; CUTTI, L.; AGUIAR, A.C. de M.; RIGON, C.A.G.; BASSO, C.J.: “Growth, phenology, and seed viability between glyphosate-resistant and glyphosate-susceptible hairy fleabane”, Revista Bragantia, 76(1): 92-101, 2017, ISSN: 1678-4499, DOI: 10.1590/1678-4499.542.

KIANIL, S.; HOUSHYAR, E.: “Energy Consumption of Rainfed Wheat Production in Conventional and Conservation Tillage Systems”, International Journal of Agriculture and Crop Sciences, 4(5): 213-219, 2012, ISSN: 2227-670X.

MACEDO, D.X.S.; NICOLAU, F.E.D.A.; DO NASCIMENTO, H.C.F.; COSTA, E.; CHIODEROLI, C.A.; LOUREIRO, D.R.: “Operational performance of a tractor-seeder according to the velocity and working depth”, Revista Brasilera de Engenharia Agrícola e Ambiental, 20(3): 280–285, 2016, ISSN: 1807-1929, DOI: http://dx.doi.org/10.1590/1807-1929/agriambi.v20n3p280-285.

MAGUIRE, J.D.: “Speed of Germination—Aid In Selection And Evaluation for Seedling Emergence And Vigor1”, Crop science, 2(2): 176–177, 1962.

MENEZES, P.C.: Semeadura cruzada de soja em sistemas de manejo do solo, UFMT, Mato Grosso, Brasil, Tesis (presentada en opción al título de Mestre em Engenharia Agrícola), 2013.

MILAGRES, R.S.; FURTADO, J.M.R.; DA SILVA, A.C.; FONTES, J.M.: “Desempenho de um conjunto trator-semeadora-adubadora em função do Mecanismo sulcador e velocidade de deslocamento”, Revista Engenharia na Agricultura, 23(2): 143-153, 2015, ISSN: 1414-3984.

MODERNEL DA SILVEIRA, J.C.; FERNANDES, H.C.; MODOLO, A.J.; DE LIMA SILVA, S.; TROGELLO, E.: “Demanda energética de uma semeadora-adubadora em diferentes velocidades de deslocamento e rotações do motor”, Revista Ciência Agronômica, 44(1), 2013.

RODRIGUES DE L., C.L.; REINERT, D.J.; REICHERT, J.M.; AKIYOSHI, L.E.: “Produtividade de culturas e resistência à penetração de Argissolo Vermelho sob diferentes manejos”, Revista Pesquisa Agropecuária Brasileira, 45(1): 89-98, 2010, ISSN: 0100-204X, DOI: 10.1590/S0100-204X2010000100012.

TRUJILLO, R.Y.M.; FERNANDES, H.C.; DOMÍNGUEZ, B.J.; DE SOUZA, C.J.E.; LOUREIRO, D.R.: “Demanda de potencia y energía de un tractor agrícola en función de las marchas de trabajo y el manejo del suelo”, Revista Engenharia na Agricultura, 21(3): 253-260, 2013, ISSN: 1414-3984, DOI: 10.13083/1414-3984.v21n03a04.

ZAMBIAZZI, E.V.; BRUZI, A.T.; DE CARVALHO, M.L.M.; SOARES, I.O.; ZUFFO, A.M.; DE REZENDE, P.M.; MIRANDA, D.H.: “Potassium Fertilization and Physiological Soybean Seed Quality”, Journal Agricultural Sciences, 5(11): 984-991, 2014, ISSN: 2156-8561, DOI: 10.4236/as.2014.511106.