Perfomance of the Base-Cutter Blades in the Sugarcane Harvester Machines Case-IH 7000

Article Sidebar

HTML PDF PDF (Español (España)) EPUB XML-JATS
Published: Jul 5, 2018
Keywords:
flaw analysis, wear, mass loss method, capacity of work

Main Article Content

Rigoberto Antonio Pérez-Reyes
Universidad de Ciego de Ávila
Lázaro Antonio Daquinta Gradaille
Universidad de Ciego de Ávila
Jorge Douglas Bonilla Rocha
Universidad de Ciego de Ávila
Carlos Alexander Recarey Morfa
Universidad Central de Las Villas
Claudio Bautista Pérez Olmo
Universidad de Ciego de Ávila
Julio Eustaquio Gómez Bravo
Universidad de Ciego de Ávila

Abstract

This paper is about the performance of the base-cutter BONEM blades in the sugar cane harvester machine CASE-IH 7000, by means of a flaw analysis and experimental field test in real condition of work by mass loss method, for determination of the tools wear. Are obtained as fundamental results that the base cutter blades are responsible for more than 50% of the system flaw and the magnitude of the wear during 48 hours of working period it will cause the loss of its total capacity of work

Article Details

How to Cite
Pérez-Reyes, R. A., Daquinta Gradaille, L. A., Bonilla Rocha, J. D., Recarey Morfa, C. A., Pérez Olmo, C. B., & Gómez Bravo, J. E. (2018). Perfomance of the Base-Cutter Blades in the Sugarcane Harvester Machines Case-IH 7000. Revista Ciencias Técnicas Agropecuarias, 27(3). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/982
Issue
Vol. 27 No. 3 (2018): July-August-September
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ABD-EL, M.H.A.; HEMEIDA, B.E.: “Sugarcane mechanical harvesting-evaluation of local applications”, J. Soil Sci. and Agric. Eng, 6(1): 129-141, 2015.

ÁLVAREZ, G.E.: Tribología: Fricción, desgaste y lubricación. Capítulo III. Degaste de los cuerpos sólidos, Ed. Feijó, UCLV, Santa Clara, Villa Clara, Cuba, 2000, ISBN: 959-250-182-3.

DAQUINTA, G.L.A.: “Indicadores técnicos y de explotación de las cosechadoras de caña de azúcar CASE-IH 7000 y 8000 en la provincia de Ciego de Ávila”, Revista Ingeniería Agrícola, 4(3): 3–8, 2017, ISSN: 2227-8761, E-ISSN: 2227-8761.

DAQUINTA, G.L.A.; DOMÍNGUEZ, B.J.; PÉREZ, O.C.; FERNÁNDEZ, S.M.: “Indicadores técnicos y de explotación de las cosechadoras de caña de azúcar CASE-IH 7000 y 8000 en la provincia de Ciego de Ávila”, Revista Ingeniería Agrícola, 4(3): 3-8, 2014, ISSN: 2227-8761, E-ISSN: 2227-8761.

GUERRA, C.W.; HERRERA V. M.; VÁZQUEZ, Y.; QUINTERO, A.B.: “Contribución de la Estadística al análisis de variables categóricas: Aplicación del Análisis de Regresión Categórica en las Ciencias Agropecuarias”, Revista Ciencias Técnicas Agropecuarias, 23(1): 68–73, 2014, ISSN: 2071-0054, E-ISSN: 2071-0054.

HERRERA, M.; GUERRA, C.W.; SARDUY, L.; GARCÍA, Y.; MARTÍNEZ, C.E.: “Diferentes métodos estadísticos para el análisis de variables discretas. Una aplicación en las ciencias agrícolas y técnicas”, Revista Ciencias Técnicas Agropecuarias, 21(1): 58–62, 2012, ISSN: 2071-0054, E-ISSN: 2071-0054.

IAGRIC: Sistema de Gestión de la calidad. Prueba de máquinas agrícolas. Evaluación tecnológico explotativa, Inst. Ministerio dela Agricultura, IAgric, PNO PG-CA-043, La Habana, Cuba, 13 p., 2013.

JAMADAR, V.; SAWAR, A.; POL, H.; DESHPANDE, N.; SAWANT, S.; PATIL, V.: “Sugarcane cutting machine”, International Advanced Research Journal in Science, Engineering and TechnologyVol, 4(special 1), 2017, ISSN: 2393-8021.

LI, S.; SHEN, Z.; MA, F.; GAO, J.; YU, X.: “Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (Research note)”, International Journal of Engineering-Transactions C: Aspects, 26(9): 975, 2013.

MA, S.; KARKEE, M.; SCHARF, P.A.; ZHANG, Q.: “Sugarcane harvester technology: a critical overview”, Applied engineering in agriculture, 30(5): 727–739, 2014, ISSN: 0883-8542.

MANHÃES, C.M.C.; GARCIA, R.F.; FRANCELINO, F.M.A.; JUNIOR, D.C.; SOLANO, C.S.; DE OLIVEIRA FRANCELINO, H.: “Visible Losses in Mechanized Harvesting of Sugarcane Using the Case IH A4000 Harvester”, American Journal of Plant Sciences, 5(18): 2734, 2014.

MATHANKER, S.K.; GRIFT, T.E.; HANSEN, A.C.: “Effect of blade oblique angle and cutting speed on cutting energy for energycane stems”, Biosystems Engineering, 133: 64–70, 2015, ISSN: 1537-5110, E-ISSN-1537-5129.

MATOS, N.; GARCÍA, E.; GONZÁLEZ, J.R.: “Evaluación técnica y de explotación de las cosechadoras de caña Case-7 000”, Revista Ciencias Técnicas Agropecuarias, 19(4): 06–09, 2010, ISSN: 2071-0054, E-ISSN: 2071-0054.

MAX, J.; PÉREZ, R.; PÉREZ, J.N.: “Evaluación del corte basal de la cosechadora C-4000 con cuchillas de tres filos”, Revista Ciencias Técnicas Agropecuarias, 21(1): 20–30, 2012, ISSN: 2071-0054, E-ISSN: 2071-0054.

MELLADO, C.J.: Aplicación del método de los elementos discretos a problemas de desgaste, [en línea], Universidad Politécnica de Cataluña, Tesis (en opción al grado científico de Doctor en Ciencias), Cataluña, España, 2005, Disponible en: https://upcommons.upc.edu/handle/2099.1/3376, [Consulta: 21 de enero de 2017].

MELLO, R.C.: “Effect of blade shape and speed on cutting forces for sugar cane”, Acta Scientiarum: Agronomy, 27: 661-665, 2005, ISSN: 1679-9275.

MELLO, R.C.; HARRIS, H.: “Desempenho de cortadores de base para colhedoras de cana-de-açúcar com lâminas serrilhadas e inclinadas”, Revista Brasileira de Engenharia Agrícola e Ambiental, 7(2): 355-358, 2003, ISSN: 1807-1929.

MOMIN, M.A.; WEMPE, P.A.; GRIFT, T.E.; HANSEN, A.C.: “Effects of Four Base Cutter Blade Designs on Sugarcane Stem Cut Quality”, Transactions of the ASABE, 60(5): 1551–1560, 2017, ISSN: 2151-0040.

SÁNCHEZ, A.; HERRERA, M.; RECAREY, C.; LÓPEZ, E.; GONZÁLEZ, O.: “Determinación del desgaste de los aperos de labranzas de suelo en condiciones de campo”, Revista Ciencias Técnicas Agropecuarias, 19(2): 16-21, 2010a, ISSN: 2071-0054.

SÁNCHEZ, Á.L.; HERRERA, M.; LÓPEZ, J. D.; LÓPEZ, E.; RECAREY, C.A.: “Desarrollo de un banco de pruebas rotacional para investigar el desgaste de los aperos de labranza”, Revista Ciencias Técnicas Agropecuarias, 19(2): 16–21, 2010b, ISSN: 2071-0054.

TAHSIN, M.D.; NAIK, R.K.; RAI, D.K.: “Design and Development of Low Cost Sugarcane Harvester for Chhattisgarh Region”, Advances in Life Sciences, 5(18): 7681-7687, 2016, ISSN: 2278-3849.

TOLEDO, A. de; SILVA, R.P. da; FURLANI, C.E.A.: “Quality of cut and basecutter blade configuration for the mechanized harvest of green sugarcane”, Scientia Agricola, 70(6): 384–389, 2013, ISSN: 0103-9016.

Most read articles by the same author(s)