Characterization of the Composite Interface of Thermoset Polymeric Matrix Reinforced with Cuban Henequen Fibers

Article Sidebar

PDF HTML (Español (España)) EPUB (Español (España))
Published: Jan 23, 2018
Keywords:
Henequen, scanning electronic microscopic, fiber, reinforcement, composite.

Main Article Content

Yosvani Guerra-Silva
Empresa Cubana de Aeropuertos y Servicios Aeronáuticos S.A.
José Luis Valin-Rivera
Pontificia Universidad Católica de Valparaíso,
María Elena Fernández-Abreu
Universidad Tecnológica de La Habana José Antonio Echeverría
Hélio Wiebeck
Universidade de Sao Paulo
Alexander Alfonso-Alvarez
Universidade de Sao Paulo
Francisco Rolando Valenzuela-Diaz
Universidade de Sao Paulo
Edison Gonçalves
Universidade de Sao Paulo
Francisco Jesús Mondelo-García
Universidad Tecnológica de La Habana José Antonio Echeverría

Abstract

The aim of this work is the characterization of the interfacial bonding of a composite material with thermofix polymeric matrix, polyester orthophthalic type, and Cuban reinforcement, consisting of henequen fibers, from Limonar, Matanzas. The henequen fibers were characterized by scanning electron microscopy (SEM) and mechanical tests and their critical length was calculated. The tensile, impact and hardness tests were performed on the composite material. After analyzing the results of the tests, we conclude that henequen fibers have positive influence as reinforcement in a thermoset polymer matrix.

Article Details

How to Cite
Guerra-Silva, Y., Valin-Rivera, J. L., Fernández-Abreu, M. E., Wiebeck, H., Alfonso-Alvarez, A., Valenzuela-Diaz, F. R., Gonçalves, E., & Mondelo-García, F. J. (2018). Characterization of the Composite Interface of Thermoset Polymeric Matrix Reinforced with Cuban Henequen Fibers. Revista Ciencias Técnicas Agropecuarias, 26(4), 26–39. Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/799
Issue
Vol. 26 No. 4 (2017): October-November-December
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

Author Biographies

Yosvani Guerra-Silva, Empresa Cubana de Aeropuertos y Servicios Aeronáuticos S.A.

MSc., Dirección Técnica

José Luis Valin-Rivera, Pontificia Universidad Católica de Valparaíso,

Dr.C, Escuela de Ingeniería Mecánica

María Elena Fernández-Abreu, Universidad Tecnológica de La Habana José Antonio Echeverría

M.Sc., Facultad de Ingeniería Mecánica.

Hélio Wiebeck, Universidade de Sao Paulo

Dr., Departamento de Engenharia Metalúrgica e de Materiais da Escola Politécnica

Alexander Alfonso-Alvarez, Universidade de Sao Paulo

Dr., Departamento de Engenharia Mecatrônica e de Sistemas Mecânicos da Escola Politécnica

Francisco Rolando Valenzuela-Diaz, Universidade de Sao Paulo

Dr., Departamento de Engenharia Metalúrgica e de Materiais da Escola Politécnica

Edison Gonçalves, Universidade de Sao Paulo

Dr., Departamento de Engenharia Mecatrònica e de Sistemas Mecánicos da Escola Politécnica,

Francisco Jesús Mondelo-García, Universidad Tecnológica de La Habana José Antonio Echeverría

M.Sc., Facultad de Ingeniería Mecánica.

References

SWOLFS, Y; GORBATIKH, L; I. VERPOEST: "Fibre hybridisation in polymer composites: A review", Composites Part A: Applied Science and Manufacturing, v. 67, pp. 181 -2 00, 2014.

GARCIA, G.P.; F.R.V. DIAZ.; J.L.VALIN; A.C. KIELING; A.R. TORRES: "Evaluation of Composite Materials With Fiber of Curauá Pineaple (Ananas Erectifolius)", Review of Research, v.4, p. 1-7, 2015. ISSN: 2249-894X.

RODRÍGUEZ, S.A.A.; J.L.VALIN; D. DIAZ; M. V FONSECA; L.M.S.A. BORGES: "Desarrollo de un material compuesto de fibras de henequén utilizando una matriz termofija", Ingeniería Mecánica (Online) SciELO. v.17, p.263-271, 2014. ISSN 18155944.

DÍAZ, D. B; D.D. FORCELLEDO; M.M. MESTRE; J.L. VALIN: "Comportamiento mecánico de fibras de henequén cubano e interfase con polímeros termoplásticos del tipo poliolefina". Ingeniería Mecánica (Online) SciELO. v.18, p.148-157, 2015. ISSN 18155944.

RODRÍGUEZ, S.A.A; L.M.S.A. BORGES; J.L. VALIN; D. DIAZ: "Fabricación de compuesto de matriz epoxi reforzado con fibras largas de henequén orientadas aleatoriamente". Ingeniería Mecánica (Online) SciELO. v.18, p.122-128, 2015. ISSN 18155944.

ORAMAS, GG; M.S. DEL CASTILLO, SA GARCÍA: "Electo de diferentes tipos de semilla en la propagación de Agave fourcroydes Lem. variedad 'Sac Ki' sobre indicadores relacionados con el crecimiento en vivero". Biotecnología Vegetal, vl4, n 3, p. 169-178, 2014. ISSN 2074-8647.

ARTHANARIESWARAN, V; A KUMARAVEL; M. KATHIRSELVAM: "Evaluation of mechanical properties of banana and sisal fiber reinforced epoxy composites: Influence of glass fiber hybridization", Materials and Design, v. 64, n. 0,pp. 194-2 02,2014.

MILANESE, A. C; M. O. H. CIOFFI; H. J. C VOORWALD: "Thermal and mechanical behaviour of sisal/phenolic composites", Composites PartB: Engineering, v. 43, n. 7, pp. 2843 -2 850, 2012.

FERNANDES, E.M; J.F. MANO; R.L REIS: "Hybrid cork-polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and ensile failure prediction", Composite Structures, v. 105, n. 0, pp. 153 -1 62, 2013.

RAMZY, A; D. BEERMANN; L. STEUERNAGEL: "Developing a new generation of sisal composite fibres for use in industrial applications", Composites PartB: Engineering, v. 66, n. 0, pp. 287 -2 98, 2014.

ZHAO, X; R.K. LI, S.L. BAI: "Mechanical properties of sisal fiber reinforced high density polyethylene composites: Effect of fiber content, interfacial compatibilization, and manufacturing process", Composites Part A: Applied Science and Manufacturing, v. 65, n. 0, pp. 169 4 74,2014.

DAI, K; L. SONG; S. JIANG; B. YU; W. YANG; R.K.K. YUEN; Y. HU: "Unsaturated polyester resins modified with phosphorus-containing groups: Effects on thermal properties and flammability", Polymer Degradation and Stability, Volume 98, Issue 10, October 2013, Pages 2033-2040, ISSN 0141-3910, http://dx.doi.Org/10.1016/j.polymdegradstab.2013.07.008.

SANYANG M.L.; S.M. SAPUAN; M. JAWAID; M.R. ISHAK; J. SAHARI: "Recent developments in sugar palm (Arengapinnata) based biocomposites and their potential industrial applications: A review", Renewable and Sustainable Energy Reviews, v. 54,2016, pages 533-549, ISSN: 1364-0321 http://dx.doi.Org/10.1016/j.rser.2015.10.037.

KHALIL H.P.S.A.; N.A. SRIAPRILIA; A.H. BHAT; M. JAWAID; M.T. PARIDAH; D. RUDI: "A Jatropha biomass as renewable materials for biocomposites and its applications", Renewable and Sustainable Energy Reviews, v.22,2013, pages 667-685, ISSN: 1364-0321, http:// dx.doi.org/10.1016/j.rser.2012.12.036.

ISLAM, M.S.; N.A.B. HASBULLAHA; M. HASANB; Z.A. TALIBC; M. JAWAIDD; M.K.M. HAAFIZ: "Physical, mechanical and biodegradable properties of kenaf/coirhybrid fiber reinforced polymer nanocomposites", Materials Today Communications, v. 4, 2015, pages 69-76, ISSN: 2352-4928, http://dx.doi.Org/10.1016/j.mtcomm.2015.05.001.

USTIMENKO, B.G.V: El cultivo de plantas tropicales y subtropicales. 1982: Editorial MIR.

STANDARD NC: 1047/1983: "Determination of the resistance to the break and of the elongation in the traction of the yarns. Testing method".

CALLISTER, W.D. & RETHWISCH, D. G: Ciencia eEngenharia deMaterials - UmaIntrodugao. Nona Edifao. 2016, LTC, 912, Brasil, 2016.

CARRILLO, L.L.F: "Modificación de las propiedades interfaciales en materiales compuestos polietileno de Alta densidad-fibra de henequén", División de Ciencias Básicas e Ingeniería. 1998, Universidad Autónoma Metropolitana-Iztapalapa: México, p. 64.

STANDARD ISO 868/2000. "Plastics and Ebonite".

STANDARD ASTM D 256. "Standard method of test for impact resistance ofplastic and electrical insulating materials''.

Most read articles by the same author(s)