Characterization of Thermo-Fixed Polymer Matrix Composite Reinforced with Cuban Zeolite Particles

Article Sidebar

PDF HTML (Español (España)) EPUB (Español (España))
Published: Nov 16, 2017
Keywords:
sifter, scanning electron microscope (SEM), X-rays diffraction, thermal analyzer, cation-exchange capacity

Main Article Content

Yosvani Guerra-Silva
Empresa Cubana de Aeropuertos y Servicios Aeronáuticos S.A.

Abstract

The present work is about the characterization of composite materials with thermoset polymeric matrix, orthophthalic polyester type and reinforcement with Cuban zeolite particles from San Andres, Holguin. Authors used different methods like sifted, scanning electron microscope (SEM) and X-rays diffraction, thermal analysis and cation exchange volumetric methods to analyze zeolite particles. The composite material was analyzed, with the use of test-tube, by mechanical test (hardness, traction, impact).

Article Details

How to Cite
Guerra-Silva, Y. (2017). Characterization of Thermo-Fixed Polymer Matrix Composite Reinforced with Cuban Zeolite Particles. Revista Ciencias Técnicas Agropecuarias, 26(3), 71–83. Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/783
Issue
Vol. 26 No. 3 (2017): July-August-September
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

Author Biography

Yosvani Guerra-Silva, Empresa Cubana de Aeropuertos y Servicios Aeronáuticos S.A.

M.Sc., Ing., Especialista, Empresa Cubana de Aeropuertos y Servicios Aeronáuticos S.A. Dirección Técnica

References

CAMPBELL, F.C.: Manufacturing technology for aerospace structural materials, ser. Aerospace engineering materials science, Ed. Elsevier,

a ed., Amsterdam, 600 p., 2006, ISBN: 978-1-85617-495-4.

ČEJKA, J.: Introduction to zeolite science and practice, ser. Studies in surface science and catalysis, no. ser. 168, Ed. Elsevier, Amsterdam,

p., 2007, ISBN: 978-0-444-53063-9.

CGEE (CENTRO DE GESTÃO E ESTUDOS ESTRATÉGICOS): Materiais Avançados 2010-2022, [en línea], Ed. CGEE, Brasília, Brasil,

p., 2010, ISBN: 978-85-60755-25-7, Disponible en: https://www.cgee.org.br/documents/10182/734063/Livro_Materiais_ Avancados_

_6367.pdf, [Consulta: 23 de junio de 2017].

HE, S.; PETKOVICH, N.D.; LIU, K.; QIAN, Y.; MACOSKO, C.W.; STEIN, A.: “Unsaturated polyester resin toughening with very low loadings

of GO derivatives”, Polymer, 110: 149-157, 2017, ISSN: 0032-3861, DOI: 10.1016/j.polymer.2016.12.057.

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION: Plásticos y ebonita, no. ISO 868:2000, 2000.

KAJTÁR, D.A.; KENYÓ, C.; RENNER, K.; MÓCZÓ, J.; FEKETE, E.; KRÖHNKE, C.; PUKÁNSZKY, B.: “Interfacial interactions and reinforcement

in thermoplastics/zeolite composites”, Composites Part B: Engineering, 114: 386-394, 2017, ISSN: 1359-8368, DOI: 10.1016/j.

compositesb.2016.12.015.

KANG, D.; SONG, L.; JIANG, S.; YU, B.; YANG, W.; YUEN, R.K.K.; HU, Y.: “Unsaturated polyester resins modified with phosphorus-containing

groups: Effects on thermal properties and flammability”, Polymer Degradation and Stability, 98(10): 2033-2040, 2013, ISSN:

-3910, DOI: 10.1016/j.polymdegradstab.2013.07.008.

MONDELO-GARCÍA, F.-J.; ALÍ-SHAH, L.; ALMEIDA, F.; VALÍN-RIVERA, J.-L.; DA SILVA-VALENZUELA, M.-G.; VALENZUELADÍAZ,

F.-R.; GUERRA-SILVA, Y.; PÉREZ-RODRÍGUEZ, F.: “Caracterización de bentonitas y zeolitas sin tratamiento como refuerzo

en materiales compuestos de matriz polimérica”, Ingeniería Mecánica, 17(1): 57-67, 2014a, ISSN: 1815-5944.

MONDELO-GARCÍA, F.-J.; JESÚS-ALMEIDA, F.; MANUEL-SOUSA, F.; VALÍN-RIVERA, J.-L.; DA-SILVA-VALENZUELA, M.-G.;

VALENZUELA-DÍAZ, F.-R.: “Caracterización física con difractogramas e hinchamiento de bentonitas organofílicas para adicionar a

materiales compuestos poliméricos”, Ingeniería Mecánica, 17(2): 118-128, 2014b, ISSN: 1815-5944.

OFICINA NACIONAL DE NORMALIZACIÓN: Zeolitas naturales. Determinación de la capacidad de intercambio catiónico total, no. NC

:2008, La Habana, Cuba, 2008a.

OFICINA NACIONAL DE NORMALIZACIÓN: Zeolitas naturales. Determinación del contenido de zeolitas, arcillas y calcita mediante

análisis térmico, no. NC 629:2008, La Habana, Cuba, 2008b.

OFICINA NACIONAL DE NORMALIZACIÓN: Zeolitas naturales. Determinación del contenido de zeolitas mediante difracción de Rayos

X, no. NC 630:2008, La Habana, Cuba, 2008c.

OFICINA NACIONAL DE NORMALIZACIÓN: Zeolitas naturales. Preparación de muestras para ensayos de laboratorio, no. NC 627:2008,

La Habana, Cuba, 2008d.

OFICINA NACIONAL DE NORMALIZACIÓN: Zeolitas naturales. Requisitos, no. NC 625:2008, La Habana, Cuba, 2008e.

SÁNCHEZ, M.J.; MAURICIO, J.E.; PAREDES, A.R.; GAMERO, P.; CORTÉS, D.: “Antimicrobial properties of ZSM-5 type zeolite functionalized

with silver”, Materials Letters, 191: 65-68, 2017, ISSN: 0167-577X, DOI: 10.1016/j.matlet.2017.01.039.

SHARMA, B.; CHHIBBER, R.; MEHTA, R.: “Curing studies and mechanical properties of glass fiber reinforced composites based on silanized

clay minerals”, Applied Clay Science, 138: 89-99, 2017, ISSN: 0169-1317, DOI: 10.1016/j.clay.2016.12.038.

SUKENIK, A.; VINER-MOZZINI, Y.; TAVASSI, M.; NIR, S.: “Removal of cyanobacteria and cyanotoxins from lake water by composites of

bentonite with micelles of the cation octadecyltrimethyl ammonium (ODTMA)”, Water Research, 120: 165-173, 2017, ISSN: 0043-1354,

DOI: 10.1016/j.watres.2017.04.075.

VÉLEZ, M.R.M.; PERUGACHI, R.: Estudio y Simulación del Comportamiento del Cemento Pórtland Tipo I con la Adición de 10% de Zeolita

Ecuatoriana Mediante el Curado al Aire, [en línea], Escuela Superior politécnica del Litoral (ESPOL), Tesis de Grado, Ecuador, 2012,

Disponible en: https://www.dspace.espol.edu.ec/handle/123456789/19734, [Consulta: 23 de junio de 2017].

WANG, B.; QIAN, T.; ZHANG, Q.; ZHAN, X.; CHEN, F.: “Heat resistance and surface properties of polyester resin modified with fluorosilicone”,

Surface and Coatings Technology, 304: 31-39, 2016, ISSN: 0257-8972, DOI: 10.1016/j.surfcoat.2016.06.075.

Most read articles by the same author(s)