Comparison of Energy Cost in Corn Cultivation with Conventional and Conservation Agriculture Systems

Article Sidebar

PDF HTML (Español (España)) EPUB (Español (España))
Published: Nov 16, 2017
Keywords:
no till with cover, mechanized operations

Main Article Content

Pedro Paneque-Rondón
Universidad Agraria de La Habana

Abstract

The objective of the research was to compare the energy cost of the main mechanized agricultural operations, emphasizing the tillage/seeding and quantify their possible saving using the Conservation System (no till with cover), in relation to the Conventional System, starting from the hypothesis that it is possible to reduce the energy cost by more than 10% in agricultural machinery operation in corn (Zea mays L.),) cultivation of Los Riecitos Company in Freites Municipality, Anzoátegui State. In the experimental design, an analysis of variance was used to determine the existence of significant differences or not between the population means of each variable and the treatments applied. For the determination of energy and operating cost, the program “Energy and Operation Costs” was used. Bulk density, moisture and soil resistance, as well as fuel consumption, energy costs and operating costs were studied in each experimental unit. It is concluded that there are no significant differences in bulk density, moisture and soil resistance in the studied depths. Physical-mechanical characteristics of the tested plots of soils do not interfere in the application of the treatments. The system with the lowest energy cost, operating costs and fuel consumption, with an average value of 28.9 L•ha-1, was that of Conservation. The technology used in the Conservation System meant a saving of labor, by investing less time (4 h•ha-1) of machinery use.

Article Details

How to Cite
Paneque-Rondón, P. (2017). Comparison of Energy Cost in Corn Cultivation with Conventional and Conservation Agriculture Systems. Revista Ciencias Técnicas Agropecuarias, 26(3), 58–70. Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/782
Issue
Vol. 26 No. 3 (2017): July-August-September
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

Author Biography

Pedro Paneque-Rondón, Universidad Agraria de La Habana

Pedro Paneque Rondón
Dr.C., Profesor Titular, Investigador Titular, Director de la Revista Ciencias Técnicas Agropecuarias
Cuba

Director de la Revista Ciencias Técnicas Agropecuarias desde el año de su fundación en 1986.

Dirección: Universidad Agraria de La Habana (UNAH), Facultad de Mecanización, Centro de Mecanización Agropecuaria (CEMA), Carretera de Tapaste y Autopista Nacional, San José de las Lajas, La Habana, Cuba, CP: 32700, Tel.: (53) (47) 864346,

Formación Académica: Graduado de Ingeniero Mecánico, 1975, Facultad de Tecnología, Universidad de La Habana.

Grado Científico: Doctor en Ciencias Técnicas. Fecha y país de otorgamiento: 1986, Universidad Agraria de La Habana, Cuba.

Posdoctorado. 2001, Universidad Federal de Viçosa, Minas Gerais, Brasil.

Institución a la que pertenece : Facultad de Mecanización de la Universidad Agraria de La Habana.

Líneas de investigación que desarrolla:

Desarrollo de Máquinas para la Siembra Directa; Agricultura de Conservación, Labranza Cero.

References

ARVIDSSON, J.; HÅKANSSON, I.: “Response of different crops to soil compaction—Short-term effects in Swedish field experiments”, Soil

and Tillage Research, 138: 56-63, 2014, ISSN: 0167-1987, DOI: 10.1016/j.still.2013.12.006.

ASAE: Agricultural engineers yearbook of standards, [en línea], Ed. American Society of Agricultural Engineers, St. Joseph, USA, 1993,

Disponible en: https://catalog.hathitrust.org/Record/009533406, [Consulta: 29 de septiembre de 2016].

BURHAN, O.; KURKLU, A.; AKCAOZ, H.: “An input–output energy analysis in greenhouse vegetable production: a case study for Antalya

region of Turkey”, Biomass and Bioenergy, 26(1): 89-95, 2004, ISSN: 0961-9534, DOI: 10.1016/S0961-9534(03)00080-1.

CASANOVA, O.E.F.: Introducción a la ciencia del suelo, Ed. Universidad Central de Venezuela, Facultad de Agronomía, Consejo de Desarrollo

Científico y Humanístico, Caracas, 379 p., 1996, ISBN: 978-980-00-0484-5.

COLLINS, N.E.; WILLIAMS, T.H.; KEMBLE, L.J.: “Measured machine energy requirements for grain production systems”, ASAE Publ.,

-81, 1981, Disponible en: https://www.osti.gov/scitech/biblio/6511154, [Consulta: 23 de junio de 2016].

DE LAS CUEVAS, M.H.R.; RODRÍGUEZ, H.T.; PANEQUE, P.; DÍAZ, Á.M.: “Costo energético del rodillo de cuchillas CEMA 1400 para

cobertura vegetal”, Revista Ciencias Técnicas Agropecuarias, 20(3): 53-56, 2011, ISSN: 2071-0054.

DE LAS CUEVAS, M.H.R.; RODRÍGUEZ, H.T.; PANEQUE, R.P.; HERRERA, P.M.I.: “Software para la determinación de los costos energéticos

y de explotación de las máquinas agrícolas”, Revista Ciencias Técnicas Agropecuarias, 18(2): 78-84, 2009, ISSN: 2071-0054.

DERPSCH, R.; SIDIRAS, N.; ROTH, C.H.: “Results of studies made from 1977 to 1984 to control erosion by cover crops and no-tillage techniques

in Paraná, Brazil”, Soil and Tillage Research, ser. Reduced Tillage - Rational Use in Sustained Production, III, 8: 253-263, 1986,

ISSN: 0167-1987, DOI: 10.1016/0167-1987(86)90338-7.

DOS REIS, E.F.: Inter-relação solo-semente com duas semeadoras-adubadoras de plantio direto, em diferentes umidades de um solo argiloso,

Universidade Federal de Viçosa, Mestrado em Engenharia Agrícola, Viçosa, MG, Brasil, 51 p., 2000.

FAO: Manual de sistemas de labranza para América Latina, [en línea], ser. Boletin de Suelos de la FAO, no. ser. 66, Ed. FAO, Roma, Italia,

p., Google-Books-ID: bpHSafz3Ma0C, 1992, ISBN: 978-92-5-303253-2, Disponible en: https://books.google.com.cu/books/about/

Manual_de_sistemas_de_labranza_ para_ Am%C3%A9.html?id=bpHSafz3Ma0C&redir_esc=y, [Consulta: 23 de junio de 2016].

FLUCK, R.C.: Energy in farm production, [en línea], Ed. Elsevier, Amsterdam, 367 p., 1992, ISBN: 978-0-444-88681-1, Disponible en: https://

www.elsevier.com/books/energy-in-farm-production/fluck/978-0-444-88681-1, [Consulta: 23 de junio de 2016].

FLUCK, R.C.; BAIRD, C.D.: Agricultural energetics, Ed. AVI Pub. Co., 192 p., Google-Books-ID: aXFRAAAAMAAJ, 1980, ISBN: 978-0-

-346-2.

FRISBY, J.C.; SUMMERS, J.D.: “Energy-Related Data for Selected Implements”, Transactions of the ASAE, 22(5): 1010-1011, 1979, ISSN:

-0059, DOI: 10.13031/2013.35145.

FUMAGALLI, M.; ACUTIS, M.; MAZZETTO, F.; VIDOTTO, F.; SALI, G.; BECHINI, L.: “An analysis of agricultural sustainability of

cropping systems in arable and dairy farms in an intensively cultivated plain”, European Journal of Agronomy, 34(2): 71-82, 2011, ISSN:

-0301, DOI: 10.1016/j.eja.2010.11.001.

HERNÁNDEZ, A.P.M.: Análisis del patinamiento en tractores de simple tracción a través de las teorías de predicción de tracción de ASAE y su

contraste experimental, [en línea], Universidad Politécnica de Madrid, Tesis de Doctorado, Madrid, España, 1998, Disponible en: https://

serviciosgate.upm.es/tesis/tesis/2893, [Consulta: 23 de junio de 2016].

HETZ, E.J.: “Energy utilization in fruit production in Chile”, Agricultural Mechanization in Asia Africa and Latin America, 29(2): 17–20,

, ISSN: 0084-5841.

LÓPEZ, J.D.; VÁZQUEZ, C.; SALAZAR, E.; ZÚÑIGA, R.; TREJO, H.I.: “Sistemas de labranza y fertilización en la producción de maíz

forrajero”, Phyton, 79(1): 47-54, 2010, ISSN: 1851-5657.

MEUL, M.; NEVENS, F.; REHEUL, D.; HOFMAN, G.: “Energy use efficiency of specialised dairy, arable and pig farms in Flanders”, Agriculture,

Ecosystems & Environment, 119(1): 135-144, 2007, ISSN: 0167-8809, DOI: 10.1016/j.agee.2006.07.002.

MOHAMMADHOSSEIN, R.; WAISMORADI, A.; HOSHANG, R.: “Energy Efficiency of Different Tillage Systems in Forage Corn Production”,

International Journal of Agriculture and Crop Sciences, 4: 1644–1652, 2012, ISSN: 2227-670X.

OFICINA NACIONAL DE NORMALIZACIÓN: Geotecnia. Determinación del contenido de humedad de los suelos y rocas en el laboratorio,

no. NC 67:00, Sust. a las NC 54-236:83 y NC 54-353:86, 2000.

PANEQUE, P.; MARRERO, E.; DE LAS CUEVAS, H.: “Determinación de la fuente energética para las labores mecanizadas de los cítricos”,

Revista Ciencias Técnicas Agropecuarias, 7(3): 25–32, 1998, ISSN: 2071-0054.

PANEQUE, R.P.; FERNANDES, H.C.; DONIZETTE, de O.A.: “Comparación de cuatro sistemas de labranza/siembra en relación con su costo

energético”, Revista Ciencias Técnicas Agropecuarias, 11(2): 1–6, 2002, ISSN: 2071-0054.

PANEQUE, R.P.; SOTO, L.D.: “Costo energético de las labores de preparación de suelo en Cuba”, Revista Ciencias Técnicas Agropecuarias,

(4): 17–21, 2007, ISSN: 2071-0054.

PICK, E.: Energy c onsumption a nd i nput-output r elations o f f ield o perations, [en línea], ser. CNRE study, no. ser. 3, Ed. FAO, Rome,

p., 1989, Disponible en: https://books.google.com.cu/books/about/Energy _Consumption_and_ Input_output_ Rela.html?id=_

ZcnGwAACAAJ&redir_esc=y, [Consulta: 23 de junio de 2016].

STOUT, B.A.: Handbook of energy for world agriculture, Ed. Elsevier Science Publishers, London, 504 p., 1990, ISBN: 978-1-85166-349-1.

SUMMERS, J.D.; KHALILIAN, A.; BATCHELDER, D.G.: “Draft Relationships for Primary Tillage in Oklahoma Soils”, Transactions of the

ASAE, 29(1): 37-39, 1986, ISSN: 2151-0059, DOI: 10.13031/2013.30097.

UNGER, P.W.; MCCALLA, T.M.: “Conservation Tillage Systems”, Advances in Agronomy, 33: 1-58, 1980, ISSN: 0065-2113, DOI: 10.1016/

S0065-2113(08)60163-7.

USDA (DEPARTAMENTO DE AGRICULTURA DE LOS ESTADOS UNIDOS): Guía para la Evaluación de la Calidad y Salud del Suelo,

[en línea], Ed. USDA, USA, 82 p., 1999, Disponible en: https://www.nrcs.usda.gov/Internet/FSE_ DOCUMENTS/stelprdb1044786.pdf,

[Consulta: 23 de junio de 2016].

Most read articles by the same author(s)

<< < 1 2