Bases teóricas para la simulación del desgaste de los órganos de trabajo de los aperos de labranza mediante el Método de los Elementos Distintos (MED)
Main Article Content
Abstract
datos primarios los parámetros macroestructurales y microestr uct urales que definen la respuesta mecánica del suelo, la her ramienta de labranza y la interfase entre ambos.
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
ASAF, Z.; D. RUBINSTEIN & I. SHMULEVICH: “Determination of discrete element model parameters required for soil tillage”, Journal of Soil & Tillage Research, 92 (1): 227-242, 2007.
BURREL, S.: Estudio del problema de desgaste empleando el método de las partículas, 27- 44pp., Master Science Thesis, Escuela Técnica Superior de caminos, canales y puertos de Barcelona. Universidad Politécnica de Cataluña, Barcelona, 2003.
COETZEE, C. J.; A. H. BASSON & P. A. VERMEER: “Discrete and continuum modelling of excavator bucket filling”, Journal Terramechanics, 44: 177-186, 2007.
COETZEE, C. J. & D. N. ELS: “Calibration of granular material parameters for DEM modelling and numerical verification by blade-granular material interaction”, Journal Terramechanics, 30 (46): 15-26, 2009.
COETZEE, C. J.; D. N. ELS & G. F. DYMOND: “Discrete element parameter calibration and the modeling of dragline bucket filling”, Journal Terramechanics, 30: 1-12, 2009.
CUNDALL, P. A. & L. D. O. STRACK: “A distinct element model for granular assemblies”, Journal Geotechnique, (29): 47-65, 1979.
GARCÍA DE LA FIGAL, C. A.: “Estudio de la fricción suelo-metal y suelo-plástico para dos suelos cañeros cubanos”, CUJAE, Ciencias Técnicas, 3: 107-122, 1978.
GRAFF, L.: Discrete element method simulation of wear due to soil-tool interaction, 120pp., Master Science Thesis, University of Saskat-chewan, Saskatoon, Canada, 2010.
GUTIÉRREZ, S. A. y B. D. FUENTES: Estudio del desgaste en materiales mediante el Metodo de Elementos Discretos. En: 8º Congreso
Iberoamericano de Ingeniería Mecánica, 23 al 25 de Octubre, pp. 1-12, Cusco, Perú, 2007.
KHOT, L. R.; V. M. SALOKHE; H. P. W. JAYASURIYA & H. NAKASHIMA: “Experimental validation of distinct element simulation for
dynamic wheel-soil interaction”, Journal Terramechanics, 44 (6): 429-437, 2007.
LÓPEZ, B. E.; C. I. CORONEL; A. C. CRUZ; M. S. HERRERA y O. C. GONZÁLEZ: “Aumento de la resistencia al desgaste de aperos
mediante la aplicación del recargue super ficial por soldadura automática”, Revista Ciencias Técnicas Agropecuarias, 16 (4): 1-4, 2005.
LÓPEZ, E.; M. HERRERA; O. GONZÁLEZ; E. B. TIJSKENS y H. RAMÓN: “Determination of basics mechanical properties in a tropical
clay soil as a function of dry bulk density and moisture”, Revista Ciencias Técnicas Agropecuarias, 21 (3): 5-11, 2012.
MACÍAS, I. S.; M. E. RAMOS y A. V. LÓPEZ: “Influencia de la fricción en la aparición del desgaste en diferentes mecanismos de las máquinas
agrícolas”, Revista Electrónica Granma Ciencia, 13 (2): 1-13, 2009.
MALONE, K. F. & B. H..XU: “Determination of contact parameters for discrete element method simulations of granular systems”, Journal
Particuology, 6 (6): 521-528, 2008.
MARTÍNEZ, F. & G. RODRÍGUEZ: Sobre la selección de materiales para el trabajo de suelos, 17pp., La Habana, (Monografía), 1985.
NAKASHIMA, H.: A Serial Domain Decomposition Method for Discrete Element Method Simulation of Soil–Wheel Interactions, pp. 10, Agricultural Engineering International: the CIGR Ejournal. Manuscript PM 08 006, Vol. 10. November, 2008.
RECAREY, C. A.; E. OÑATE; J. MIGUEL; J. ROJEK; F. ZARATE y S. BURREL: Simulación de problemas de desgaste en la interacción herramienta de corte terreno empleando el Método de los Elementos Discretos, 25pp., Ed. UCLV, Santa Clara, Villa Clara, Cuba, 2001.
SHMULEVICH, I.: “State of the art modeling of soil-tillage interaction using discrete element method”, Journal Agricultural Engine, 3: 41-53, 2010.
SHMULEVICH, I.; Z. ASAF y D. RUBINSTEIN: Interaction between Soil and a Wide Cutting Blade Using the Discrete Element Method, pp. 46, Haifa 32000, Ed. Technion - Israel Institute of Technology, Israel, 2007.
SHMULEVICH, I.; D. RUBINSTEIN y Z. ASAF: Capter 5: Discrete Element Modeling of Soil-Machine Interactions. Advances in Soil Dynamics Volume 3. S.K. Upadhyaya, W.J. Chancellor, D. Wulfsohn, and T.R. Way, eds., pp. 399-413. St. Joseph, Mich.: ASABE. Copyright 2009 American Society of Agricultural and Biological Engineers, USA, 2009.
SONI, P. & V. SALOKHE: “Theoretical Analysis of Microscopic Forces at Soil-tool Interfaces: A Review”, Journal Agricultural Engineering International, 8: 1-25, 2006.
TANAKA, H.; A. OIDA; M. DAIKOKU; K. INOOKU; O. SUMIKAWA; Y. NAGASAKI & M. MIYAZAKI: “DEM Simulation of Soil Loosening Process Caused by a Vibrating Subsoiler”, Agricultural Engineering International: the CIGR Ejournal, 9:
ZHANG, R. & J. LI: Simulation on Mechanical Behavior of Cohesive Soil by Distinct Element Method. Memorias del 7t h Asia-Pacific Conference and 25th Annual Meeting of the Japanese Society for Terramechanics of the ISTVS, Sept 11 to 16, pp. 9, Changchun, China. 2004.