Automated system for determining the operating parameters of hydraulic machines
Article Sidebar
Main Article Content
Abstract
The purpose of this paper is to develop an automated system that determines the operating parameters of rotary hydraulic machines (pumps and motors), as well as the optimal operating regimes of the hydraulic machines, the coefficient of isogonality, and the relationships between pump and motor efficiency. The software results also display curves of the total efficiency of the pump and hydraulic motor as a function of the coefficient of isogonality, ensuring rapid and accurate evaluation.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
DRANSFIELD, P.: Hydraulic control systems-design and analysis of their dynamics, Ed. Springer, 1981.
GUASUMBA, M.J.E.; GARAY, C.V.A.; SOLÍS, S.J.M.; JIMA, M.J.C.: “Análisis del sistema de inyección electrónica de combustible para motor de combustión interna respecto a sus fallas y mantenimiento”, Polo del Conocimiento, 6(1): 603-621, 2021, ISSN: 2550-682X.
KONG, X.; CAI, B.; LIU, Y.; ZHU, H.; LIU, Y.; SHAO, H.; YANG, C.; LI, H.; MO, T.: “Optimal sensor placement methodology of hydraulic control system for fault diagnosis”, Mechanical Systems and Signal Processing, 174: 109069, 2022, ISSN: 0888-3270.
LLANES, C.E.A.; MORENO, P.A.; GUAÑA, F.W.V.; JIMA, M.J.C.: “Análisis estructural de un bus por el método de elementos finitos”, 2020, ISSN: 2550-682X.
MANRING, N.D.; FALES, R.C.: Hydraulic control systems, Ed. John Wiley & Sons, 2019, ISBN: 1-119-41647-7.
MERRITT, C.: “Systems Approach to Pipe Handling, Cementing, and Mud Mixing”, En: Annual Meeting of the American Institute of Mining, Metallurgical, and Petroleum Engineers, Ed. SPE, p. SPE-1729, 1967, ISBN: 1-55563-841-4.
NEKRASOV, B.: Hidráulica, Ed. Mir, Moscú, Rusia, Moscú, Rusia, Publisher: MOSCÚ: MIR, 1968a.
NEKRASOV, B.: Hidráulica, Ed. Instituto cubano del libro, La Habana, Cuba, vol. 1, La Habana, Cuba, 976 p., 1968b.
PANEQUE, R.P.: Elementos y Sistemas Oleohidráulicos en las Máquinas Agrícolas, Ed. Universidad Autónoma Chapingo, primera ed., vol. 1, Universidad Autónoma Chapingo, Departamento de Ingeniería Mecánica Agrícola, Chapingo, Texcoco, Edo. México, 285 p., 2010, ISBN: 978-959-16-2382-9.
PANEQUE, R.P.; LÓPEZ, C.G.; MAYANS, C.P.; MUÑOZ, G.F.; GAYTÁN, R.J.G.; ROMANTCHIK, K.E.: Fundamentos Teóricos y Análisis de Máquinas Agrícolas, Ed. Universidad Autónoma Chapingo, vol. 1, Chapingo, Texcoco, México, 456 p., 2018, ISBN: 978-607-12-0532-2.
PÉREZ, S.; PANEQUE, P.: “Parámetros de rendimiento de una bomba oleohidráulica”, Revista Ciencias Técnicas Agropecuarias, 10(1): 37-40, 2001.
PÉREZ, S.L.; PANEQUE, R.P.; DE LAS CUEVAS, M.H.: “Fundamentación de los parámetros de funcionamiento de la máquina hidráulica rotatoria”, Revista Ciencias Técnicas Agropecuarias, 14(1): 19-22, 2005, ISSN: 1010-2760.
TIPÁN, S.A.M.; BELTRAN, C.C.M.; JIMA, M.J.C.; GUASUMBA, M.J.E.; VEGA, S.W.H.: “Análisis del rendimiento de las bombas hidráulicas de máquinas autopropulsadas dedicadas a movimiento de tierras”, Polo del Conocimiento, 6(3): 1570-1580, 2021, ISSN: 2550-682X.
YAO, J.: “Model-based nonlinear control of hydraulic servo systems: Challenges, developments and perspectives”, Frontiers of Mechanical Engineering, 13: 179-210, 2018, ISSN: 2095-0233.