Influence of the Forward Speed in the Cutting Forces of a Vibrating Subsoiler

Article Sidebar

PDF (Español (España)) PDF HTML EPUB XML-JATS
Published: Mar 1, 2023
Keywords:
FEM, Draft Force, Simulation Model, Forward Speed

Main Article Content

Luis Orlando Marín Cabrera
Universidad Agraria de La Habana (UNAH)
Armando Eloy García de la Figal Costales
Universidad Agraria de La Habana (UNAH)
Arturo Martínez Rodríguez
Universidad Agraria de La Habana (UNAH)

Abstract

In the present work, it is analyzed the behavior of the cutting forces (draft force and vertical force)of a vibrating subsoiler tilling a silt loam soil (ferralitic), by a soil-tillage interaction simulation model, developed applying the Finite Element Model and using the elastoplastic Drucker-Prager constitutive model and Solid Works design software. The soil parameters and properties required for simulation, the boundary conditions and acting loads were assigned to model and the meshing of the model was realized. Several running of the model were also realized for four forward speeds (0 ms-1; 0, 4 ms-1; 0, 8 ms-1 and 1, 2 ms-1). The results showed the quadratic behavior of both forces with the increasing of forward speed.

Article Details

How to Cite
Marín Cabrera, L. O., García de la Figal Costales, A. E., & Martínez Rodríguez, A. (2023). Influence of the Forward Speed in the Cutting Forces of a Vibrating Subsoiler. Revista Ciencias Técnicas Agropecuarias, 32(1). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/1686
Issue
Vol. 32 No. 1 (2023): January-February-March
Section
Original Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ABO, E.M.; HAMILTON, R.; BOYLE, J.: “Simulation of soil-blade interaction for sandy soil using advanced 3D finite element analysis”, Soil and Tillage Research, 75(1): 61-73, 2004, ISSN: 0167-1987.

ABO, E.M.; HAMILTON, R.; BOYLE, J.T.: “3D Dynamic analysis of soil-tool interaction using the finite element method”, Journal of Terramechanics, 40(1): 51-62, 2003, ISSN: 0022-4898.

ABU, H.N.H.; REEDER, R.C.: “A nonlinear 3D finite element analysis of the soil forces acting on a disc plow”, Soil & Tillage Research, (74): 115-124, 2003, ISSN: 0167-1987.

AREFI, M.; KARPARVARFARD, S.H.; AZIMI, N.H.; NADERI, B.M.: “Draught force prediction from soil relative density and relative water content for a non-winged chisel blade using finite element modelling”, Journal of Terramechanics, 100: 73-80, 2022, ISSN: 0022-4898, DOI: https://doi.org/10.1016/j.jterra.2022.01.001.

BENTAHER, H.; IBRAHMI, A.; HAMZA, E.; HBAIEB, M.; KANTCHEV, G.; MAALEJ, A.; ARNOLD, W.: “Finite element simulation of moldboard-soil interaction”, Soil and Tillage Research, 134: 11-16, 2013, ISSN: 0167-1987.

DE LA ROSA, A.A.A.; QUINTEROS, A.P.R.; GONZÁLEZ, C.O.; RODRÍGUEZ, M.A.; HERRERA, S.M.: “Adjustment of the plastic parameters of the Extended Drucker Prager model for the simulation of the mechanical response of a clayey soil (Vertisol)”, Revista Ciencias Técnicas Agropecuarias, 25(3): 4-12, 2016, ISSN: 1010-2760, e-ISSN: 2071-0054.

DRUCKER, D.C.; PRAGER, W.: “Soil mechanics and plastic analysis or limit design”, Quarterly of applied mathematics, 10(2): 157-165, 1952, ISSN: 0033-569X.

GEBREGZIABHER, S.; MOUAZEN, A.M.; VAN BRUSSEL, H.; RAMON, H.; MERESA, F.; VERPLANCKE, H.; NYSSEN, J.; BEHAILU, M.; DECKERS, J.; ALBURQUERQUE, J.A.: “Design of the Ethiopian ard plough using structural analysis validated with finite element analysis”, Biosystems Engineering, 97(1): 27-39, 2007, ISSN: 1537-5110.

GONZÁLEZ, C.O.: Modelación de la compactación provocada por el tráfico de neumáticos, de los vehículos agrícolas, en suelos en condiciones de laboratorio, Universidad Agraria de La Habana. Centro de Mecanización Agropecuaria, Tesis (en opción al grado científico de Doctor en Técnicas Agropecuarias), San José de las Lajas, Mayabeque, Cuba, 100 p., publisher: Universidad Central “Marta Abreu” de Las Villas. Facultad de Ciencias …, 2011.

GONZÁLEZ, C.O.; HERRERA, S.M.; IGLESIAS, C.C.E.; LÓPEZ, B.E.: “Modelos constitutivos drucker prager extendido y drucker prager modificado para suelos rhodic ferralsol”, Terra Latinoamericana, 32(4): 283-290, 2014, ISSN: 0187-5779.

HERNÁNDEZ, J.A.; PÉREZ, J.J.M.; MESA, N.Á.; BOSCH, I.D.; RIVERO, L.; CAMACHO, E.: Nueva versión de la clasificación genética de los suelos de Cuba., Ed. AGRINFOR, Barcaz L L ed., vol. I, La Habana, Cuba, 64 p., 1999, ISBN: 959-246-022-1.

HERRERA, S.M.: Simulación del comportamiento mecánico de los suelos ferralíticos rojos mediante el método de elementos finitos, Universidad Agraria de La Habana. Centro de Mecanización Agropecuaria, Tesis (en opción al grado científico de Doctor en Técnicas Agropecuarias), San José de las Lajas, La Habana, Cuba, 109 p., publisher: Universidad Central “Marta Abreu” de Las Villas. Facultad de Ciencias …, 2006.

HERRERA, S.M.; IGLESIAS, C.C.E.; GONZÁLEZ, C.O.; LÓPEZ, B.E.: “Propiedades mecánicas de un Rhodic Ferralsol requeridas para la simulación de la interacción suelo implemento de labranza mediante el Método de Elementos Finitos: Parte II Interfase suelo-herramienta”, Revista Ciencias Técnicas Agropecuarias, 17(4): 50-54, 2008a, ISSN: 1010-2760, e-ISSN: 2071-0054.

HERRERA, S.M.; IGLESIAS, C.C.E.; GONZÁLEZ, C.O.; LÓPEZ, B.E.; SÁNCHEZ, I.A.: “Propiedades mecánicas de un Rhodic Ferralsol requeridas para la simulación de la interacción suelo implemento de labranza mediante el Método de Elementos Finitos: Parte I”, Revista Ciencias Técnicas Agropecuarias, 17(3): 31-38, 2008b, ISSN: 1010-2760, e-ISSN: 2071-0054.

HERRERA, S.M.; IGLESIAS, C.C.E.; JARRE, C.C.; LEÓN, S.Y.; LÓPEZ, B.E.; GONZÁLEZ, C.O.: “Predicción de la resistencia del suelo durante la labranza mediante los modelos de presiones pasivas”, Revista Ciencias Técnicas Agropecuarias, 24(3): 5-12, 2015, ISSN: 1010-2760, e-ISSN: 2071-0054.

HESAR, H.D.; KALANTARI, D.: “Design a biomimetic disc using geometric features of the claws”, Agricultural Engineering International: CIGR Journal, 18(1): 103-109, 2016, ISSN: 1682-1130.

IBRAHMI, A.; BENTAHER, H.; HAMZA, E.; MAALEJ, A.; MOUAZEN, A.M.: “3D finite element simulation of the effect of mouldboard plough’s design on both the energy consumption and the tillage quality”, The International Journal of Advanced Manufacturing Technology, 90(1): 473-487, 2017, ISSN: 1433-3015.

IBRAHMI, A.; BENTAHER, H.; HBAIEB, M.; MAALEJ, A.; MOUAZEN, A.M.: “Study the effect of tool geometry and operational conditions on mouldboard plough forces and energy requirement: Part 1. Finite element simulation”, Computers and Electronics in Agriculture, 117: 258-267, 2015, ISSN: 0168-1699.

LAMIA, A.A.D.; EL-HADDAD, Z.A.; AFIFY, M.T.: “Modeling the effect of soil-tool interaction on draft force using visual basic”, Annals of Agricultural Science, Moshtohor, 58(2): 223-232, 2020, ISSN: 1110-0419, ISSN 1110-041, Disponible en:https://assjm.journals.ekb.eg.

MARÍN, C.L.O.; LEYVA, S.O.; HERRERA, S.M.: “Efecto del modo de vibración y la velocidad de trabajo en la disminución de la resistencia traccional de los órganos escarificadores vibratorios”, Revista Ciencias Técnicas Agropecuarias, 20(3): 57-62, 2011, ISSN: 1010-2760, e-ISSN: 2071-0054.

MARÍN, C.L.O.; GARCÍA DE LA FIGAL, C.A.E.: “Model of Soil-TillageTool Interaction Using Finite Element Method”, Revista Ciencias Técnicas Agropecuarias, 28(4): 40-50, 2019, ISSN: 1010-2760, e-ISSN: 2071-0054.

MOLLAZADE, K.; JAFARI, A.; EBRAHIMI, E.: “Application of dynamical analysis to choose best subsoiler’s shape using ANSYS”, New York Science Journal, 3(3): 93-100, 2010.

NADERI, B.M.; ALIMARDANI, R.; HEMMAT, A.; SHARIFI, A.; KEYHANI, A.; TEKESTE, M.Z.; KELLER, T.: “3D finite element simulation of a single-tip horizontal penetrometer-soil interaction. Part I: Development of the model and evaluation of the model parameters”, Soil and Tillage Research, 134: 153-162, 2013, ISSN: 0167-1987.

ONWUALU, A.P.; WATTS, K.C.: “Draught and vertical forces obtained from dynamic soil cutting by plane tillage tools”, Soil and Tillage Research, 48(4): 239-253, 1998, ISSN: 0167-1987.

PAYNE, P.: “The relationship between the mechanical properties of soil and the performance of simple cultivation implements”, Journal of Agricultural Engineering Research, 1(1): 23-50, 1956.

ROSA, U.; WULFSOHN, D.: “Application of the finite element method in agricultural soil mechanics”, En: Advances in Soil Dynamics Volume 2, Ed. American Society of Agricultural and Biological Engineers, p. 117, 2002, ISBN: 1-892769-82-4.

SOIL SURVEY STAFF: Keys to soil taxonomy, Ed. USDA Natural Resources Conservation Service, Washington, DC, USA, 346 p., 2010.

SOIL SURVEY STAFF: Keys to Soil Taxonomy, Ed. Government Printing Office, USDA Natural Resources Conservation Service ed., Washington, DC, USA, 346 p., 2014, ISBN: 0-16-092321-2.

TOPAKCI, M.; CELIK, H.K.; CANAKCI, M.; RENNIE, A.; AKINCI, I.; KARAYEL, D.: “Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine”, Journal of Food, Agriculture and Environment, 8(2): 531-536, 2010, ISSN: 1459-0255.

WANG, Y.; OSMAN, A.N.; ZHANG, D.; YANG, L.; CUI, T.; ZHONG, X.: “Optimized design and field experiment of a staggered vibrating subsoiler for conservation tillage”, International Journal of Agricultural and Biological Engineering, 12(1): 59-65, 2019, ISSN: 1934-6352.