Effect of Vibrations and Operational Parameters in Frequency and Amplitude of a Vibratory Subsoiler

Article Sidebar

PDF HTML EPUB XML
Published: May 13, 2021
Keywords:
Subsoiler, Free Vibrations, Forced Vibrations, Working Depth

Main Article Content

Luis Orlando Marín-Cabrera
Universidad Agraria de La Habana
Armando Eloy García de la Figal-Costales
Universidad Agraria de La Habana
Arturo Martínez-Rodríguez
Universidad Agraria de La Habana

Abstract

This paper aims to analyze the effect of free and forced vibrations and of working depth on the frequency and amplitude of a vibratory curved bent leg subsoiler plowing a silt loam soil (Rhodic Ferralsol) by the modal analysis of the soil-bent leg system. The finite elements method and the design software Solid Works with its complement Simulation were used to model and to simulate, the bent leg scarifier­ soil interaction. The soil was considered as homogeneous and elastoplastic of Drucker-Prager extended constitutive relation. The results showed the significant effect of the work depth on the frequencies and amplitude of the soil when the vibratory system works with free vibrations. When forced vibrations were used to different work depths, significant differences were not observed in frequencies neither of the bent leg nor of the soil. On the other hand, the resonant frequencies of the shank obtained corresponding to the two first vibration modes (2,20; 8,47 and 13,35 Hz) at a working depth of 200 mm allowed a better loosening of the soil

Article Details

How to Cite
Marín-Cabrera, L. O., García de la Figal-Costales, A. E., & Martínez-Rodríguez, A. (2021). Effect of Vibrations and Operational Parameters in Frequency and Amplitude of a Vibratory Subsoiler. Revista Ciencias Técnicas Agropecuarias, 30(2). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/1405
Issue
Vol. 30 No. 2 (2021): April-May-June
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ANI, A.; UZOEJINWA, B.; EZEAMA, O.; UGWU, S.; OHAGWU, C.; ODIGBOH, E.: “Soil bin facility for soil-machine interaction studies”, En: International Soil Tillage Research Organization (ISTRO) Nigeria Symposium, Akure, November 3 - 6, Ed. International Soil Tillage Research Organization (ISTRO), Department of Agricultural and Bioresources Engineering, University of Nigeria, Nsukka, pp. 110 – 124, 2014.

BANDALAN, E.; SALOKHE, V.; GUPTA, C.; NIYAMAPA, T.: “Performance of an oscillating subsoiler in breaking a hardpan”, Journal of Terramechanics, 36(2): 117-125, 1999, ISSN: 0022-4898.

BUTSON, M.; MACINTYRE, D.: “Vibratory soil cutting: I. Soil tank studies of draught and power requirements”, Journal of Agricultural Engineering Research, 26(5): 409-418, 1981, ISSN: 0021-8634.

DE LA ROSA, A.A.A.; HERRERA, S.M.; GONZÁLEZ, C.O.: “Los Modelos Constitutivos para la Simulación de la Respuesta Mecánica de los Suelos Agrícolas mediante el Métodos de Elementos Finito (MEF).”, Revista de Investigaciones de la Universidad Le Cordon Bleu, 1(1): 49-59, 2014, ISSN: 2409-1537.

GARCÍA DE LA FIGAL, C.: “Estudio de la fricción suelo-metal y suelo-plástico para dos suelos cañeros cubanos”, Ciencias Técnicas, Ingeniería en la Construcción de Maquinaria, 3(1): 107-122, 1978.

GARCÍA DE LA FIGAL, C.A.: “Estudio de las propiedades tecnológicas más importantes de los suelos cubanos”, Revista Ciencias Técnicas Agropecuarias, 3(2): 61-77, 1991, ISSN: 1010-2760, e-ISSN: 2071-0054.

GONZÁLEZ, C.O.; HERRERA, S.M.; IGLESIAS, C.C.E.; LÓPEZ, B.E.: “Modelos constitutivos drucker prager extendido y drucker prager modificado para suelos rhodic ferralsol”, Terra Latinoamericana, 32(4): 283-290, 2014, ISSN: 0187-5779.

HERNÁNDEZ, J.A.; PÉREZ, J.J.M.; BOSCH, I.D.; CASTRO, S.: Clasificación de los suelos de Cuba, Ed. INCA, Ediciones INCA ed., San Jose de las Lajas, Mayabeque. Cuba, 93 p., 2015, ISBN: 978-959-7023-77-7.

HERRERA, S.M.; IGLESIAS, C.C.E.; GONZÁLEZ, C.O.; LÓPEZ, B.E.; SÁNCHEZ, I.Á.: “Propiedades mecánicas de un Rhodic Ferralsol requeridas para la simulación de la interacción suelo implemento de labranza mediante el Método de Elementos Finitos: Parte I”, Revista Ciencias Técnicas Agropecuarias, 17(3): 31-38, 2008a, ISSN: 1010-2760, e-ISSN: 2071-0054.

HERRERA, S.M.; IGLESIAS, C.C.E.; GONZÁLEZ, C.O.; LÓPEZ, B.E.; SÁNCHEZ, I.Á.: “Propiedades mecánicas de un Rhodic Ferralsol requeridas para la simulación de la interacción suelo implemento de labranza mediante el Método de Elementos Finitos: Parte II. Interfase suelo-herramienta”, Revista Ciencias Técnicas Agropecuarias, 17(4): 50-54, 2008b, ISSN: 1010-2760, e-ISSN: 2071-0054.

IBRAHMI, A.; BENTAHER, H.; HBAIEB, M.; MAALEJ, A.; MOUAZEN, M.A.: “Study the effect of tool geometry and operational conditions on mouldboard plough forces and energy requirement: Part 1. Finite element simulation”, Computers and Electronics in Agriculture, 117: 258-267, 2015, ISSN: 0168-1699.

KAROONBOONYANAN, R.; SALOKHE, V.; NIYAMAPA, T.; NAKASHIMA, H.: “Vibration effects on the performance of a single-shank subsoiler”, Agricultural Engineering International: CIGR Journal E journal. Manuscript PM 07 018, 9, 2007, ISSN: 1682-1130.

LARSON, L.W.: “The future of vibratory tillage tools”, Transactions of the ASAE, 10(1): 78-79, 1967, ISSN: 2151-0032.

LUNA, L.A.; GONZÁLEZ, I.J.A.: “Estudio de la influencia de las vibraciónes verticales en los requerimientos energéticos del laboreo profundo del suelo”, Revista Ciencias Técnicas Agropecuarias, 11(3): 39-41, 2002, ISSN: 1010-2760, e-ISSN: 2071-0054.

MARÍN, C.L.O.; GARCÍA DE LA FIGAL, A.E.; MARTÍNEZ, R.A.: “Effect of the Geometry and Operational Conditions in the Draft Forces of the Arm of a Vibratory Scarifier”, Revista Ciencias Técnicas Agropecuarias, 29(2), 2020, ISSN: 1010-2760, e-ISSN: 2071-0054.

MARÍN, C.L.O.; GARCÍA DE LA FIGAL, C.A.: “Model of Soil-TillageTool Interaction Using Finite Element Method”, Revista Ciencias Técnicas Agropecuarias, 28(4), 2019, ISSN: 1010-2760, e-ISSN: 2071-0054.

PREM, M.; SWARNKAR, R.; KANTILAL, V.D.K.; JEETSINH, P.S.K.; CHITHARBHAI, K.B.: “Combined tillage tools-a review”, Current Agriculture Research Journal, 4(2): 179-185, 2016, ISSN: 2347-4688.

RAO, G.; CHAUDHARY, H.: “A review on effect of vibration in tillage application”, En: IOP Conference Series: Materials Science and Engineering, ser. Mater. Sci. Eng. . 377 012030, Ed. IOP Publishing, vol. 377, 2018, ISBN: 1757-899X.

RAO, G.; CHAUDHARY, H.; SHARMA, A.: “Design and analysis of vibratory mechanism for tillage application”, Open Agriculture, 3(1): 437-443, 2018.

SHAHGOLI, G.; FIELKE, J.; DESBIOLLES, J.; SAUNDERS, C.: “Optimising oscillation frequency in oscillatory tillage”, Soil and tillage research, 106(2): 202-210, 2010, ISSN: 0167-1987.

SHKURENKO, N.S.: Experimental data on the effect of oscillation on the cutting resistance of soil, Ed. National Institute of Agricultural Engineering, USA, 1966.

SMITH, J.L.; DAIS, J.L.; FLIKKE, A.M.: “Theoretical analysis of vibratory tillage”, Transactions of the ASAE, 15(5): 831-0833, 1972, ISSN: 2151-0032.

SULATISKY, M.T.; UKRAINETZ, P.R.: “Draft reduction by vibratory soil cutting”, Transactions of the Canadian Society for Mechanical Engineering, 1(4): 175-181, 1972.

ZHANG, J.: Vibratory analysis of tillage operation, University of Saskatchewan, Department of Agricultural and Bioresource Engineering, Doctoral Thesis, Saskatchewan, Canada, 1997.

Most read articles by the same author(s)

1 2 > >>