An Approach to the Simulation of Wear by Numerical Methods

Article Sidebar

HTML PDF XML-JATS EPUB
Published: Nov 26, 2019
Keywords:
ABAQUS, FEM, DEM, wear

Main Article Content

Rigoberto Antonio Pérez Reyes
Universidad de Ciego de Ávila
Lázaro Antonio Daquinta Gradaille
Universidad de Ciego de Ávila
Jorge Douglas Bonilla Rocha
Universidad de Ciego de Ávila
Carlos Alexander Recarey Morfa
Universidad Central de Las Villas
Anibal Sánchez Numa
Universidad de Ciego de Ávila

Abstract

Agricultural machinery has an enemy that threatens its durability and conservation: wear. The wear generates considerable losses of materials, resources and time, with the consequent reduction of the production, leads to the loss of a large quantity of means for its repair, as well as in the elaboration or acquisition of new elements. In this work, an approach towear simulation by numerical methods is made, specifically, the Finite Element Method (FEM) and the Discrete Elements Method (DEM), approaching, in a general way, the benefits of both methods in the analysis of the physical phenomenon, as well as their combination to obtain a closer approximation to the study of contact between bodies.

Article Details

How to Cite
Pérez Reyes, R. A., Daquinta Gradaille, L. A., Bonilla Rocha, J. D., Recarey Morfa, C. A., & Sánchez Numa, A. (2019). An Approach to the Simulation of Wear by Numerical Methods. Revista Ciencias Técnicas Agropecuarias, 28(4). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/1193
Issue
Vol. 28 No. 4 (2019): October-November-December
Section
View Points

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

ATTANASIO, A.; FAINI, F.; OUTEIRO, J.C.: “FEM simulation of tool wear in drilling”, Procedia CIRP, 58: 440-444, 2017, ISSN: 2212-8271, DOI: 10.1016/j.procir.2017.03.249.

BURREL, S.: Estudio del problema de desgaste empleando el método de las partículas, Universidad Politécnica de Cataluña, Barcelona, Escuela Técnica Superior de caminos, canales y puertos de Barcelona., Master Science Thesis, Barcelona, España, 27-44 p., 2003.

CHAMPAGNE, M.; ACUTIS, M.; BERTHIER, Y.: “Modeling wear for heterogeneous bi-phasic materials using discrete elements approach”, Journal of Tribology, 136(2): 021603, 2014, ISSN: 0742-4787.

CRUZADO, A.; LEEN, S.; URCHEGUI, M.; GÓMEZ, X.: “Finite element simulation of fretting wear and fatigue in thin steel wires”, International Journal of Fatigue, 55: 7-21, 2013, DOI: http://dx.doi.org/10.1016/j.ijfatigue.2013.04.025.

CRUZADO, A.; ZABALA, A.; URCHEGUI, M.; GÓMEZ, X.: “Definición de una metodología optimizada para la simulación del desgaste en materiales metálicos”, Revista de Metalurgia, 46(Extra): 106-114, 2010, ISSN: 0034-8570, E-ISSN: 1988-4222, DOI: 10.3989/revmetalmadrid.11XIIPMS.

DA SILVA, M.N.L.: Estudo do desgaste de componentes de sistemas de amarração de plataformas offshore, Universidade de Brasília, Eng. Thesis, Engenheiro Mecânico, Brasília, Brasil, 75 p., 2016.

DING, J.; LEEN, S.; WILLIAMS, E.; SHIPWAY, P.: “Finite element simulation of fretting wear-fatigue interaction in spline couplings”, Tribology-Materials, Surfaces & Interfaces, 2(1): 10-24, 2008, ISSN: 1751-5831, DOI: 10.1179/175158308x320791.

GOREHAM, V.C.M.; BROWN, T.D.: “Finite Element Wear Simulation of the Charite Total Disc Replacement, Including Cross-Shear,”, [en línea], En: Poster No. 2417, 55th Annual Meeting of the Orthopaedic Research Society, Ed. University of Lowa, Lowa City, LA, USA, p. 1, 2017, Disponible en:Disponible en:https://www.ors.org/Transactions/55/2417.pdf ,[Consulta: 5 de marzo de 2018].

GUTIÉRREZ, S.A.; FUENTES, B.D.: “Estudio del desgaste en materiales mediante el Metodo de Elementos Discretos”, [en línea], En: 8o Congreso Iberoamericano de Ingeniería Mecánica, Cusco , (23 al 25 de Octubre), vol. 23, Cusco, pp. 1-12, 2007, Disponible en:Disponible en:https://upcommons.upc.edu/.../CIBIM8 ,[Consulta: 21 de enero de 2018].

HEMANTH, J.: “Finite element wear behavior modeling of al/al2sio5/c chilled hybrid metal matrix composites (CHMMCS)”, Materials Sciences and Applications, 2(07): 878-890, 2011, DOI: 10.4236/msa.2011.27118.

HERNÁNDEZ, R.; RIERA, C.M.D.: “Simulación de fenómenos de desgaste mediante el uso de ABAQUS/SCRIPTING”, [en línea], En: XII Reunión de Usuarios de Abaqus, CTM-Centre Tecnològic, Barcelona, España, p. 8, 2014, Disponible en:Disponible en:https://www.researchgate.net/publication/267705327.pdf ,[Consulta: 16 de febrero de 2018].

HERNÁNDEZ, R.; RIERA, C.M.D.; PRADO, J.M.: “Modelización y simulación del desgaste en aceros de herramientas”, [en línea], En: X Reunión de Usuarios de ABAQUS, CTM-Centre Tecnològic, Barcelona, España, p. 7, 2005, Disponible en:Disponible en:https://upcommons.upc.edu/bitstream/handle/2117/14533/2005-ABAQUS-DESGASTE%20HERRAMIENTAS.pdf , [Consulta: 16 de febrero de 2018].

HERNÁNDEZ, R.R.; CRUZ, M.; CASELLAS, P.D.; RIERA, C.M.D.; PRADO, P.J.M.: “Evaluación del comportamiento a desgaste en aceros de herramienta: simulación por ordenador y verificación experimental”, En: Anales de mecánica de la fractura, vol. 2, pp. 619-623, 2007, ISBN: 0213-3725.

HU, G.; HU, Z.; JIAN, B.; LIU, L.; WAN, H.: “On the determination of the damping coefficient of non-linear spring-dashpot system to model Hertz contact for simulation by discrete element method”, En: 2010 WASE International Conference on Information Engineering, Ed. IEEE, vol. 3, pp. 295-298, 2010, ISBN: 1-4244-7507-4.

KANAVALLI, B.: Application of user defined subroutine UMESHMOTION in ABAQUS for simulating dry rolling/sliding wear, Royal Institute of Technology (KTH), Master of Science (Scientific Computing), Stockholm, Sweden, 2006.

MCCOLL, I.; DING, J.; LEEN, S.: “Finite element simulation and experimental validation of fretting wear”, Wear, 256(11-12): 1114-1127, 2004, ISSN: 0043-1648.

MORALES, Q.M.: Formulación de elementos finitos y elementos discretos, [en línea], Centro de Investigación en Matemáticas. Centro Internacional de Métodos Numéricos en Ingeniería, MSc. Thesis, Barcelona, España, 91 p., 2013, Disponible en:Disponible en:https://www.cimat.mx/sites/default/files/PDFs/A_CIMNE_CIMAT/DEM.pdf ,[Consulta: 14 de marzo de 2018].

NEGRÍN, I.L.; SOUZA, M.R.; PÉREZ, A.E.: “Estudio del contacto entre un pentrador rígido y una probeta de aluminio considerando carga normal y desplazamiento tangencial usando el metodo de los elementos finitos”, Revista Iberoamericana de Ingeniería Mecánica, 12(1): 15-23, 2008.

NITKA, M.; COMBE, G.; DASCALU, C.; DESRUES, J.: “Two-scale modeling of granular materials: a DEM-FEM approach”, Granular Matter, 13(3): 277-281, 2011, ISSN: 1434-5021, DOI: 10.1007/s10035-011-0255-6.

OÑATE, E.; LABRA, C.; ZÁRATE, F.; ROJEK, J.; MIQUEL, J.: “Avances en el desarrollo de los Métodos de Elementos Discretos y de Elementos Finitos para el análisis de problemas de fractura”, En: Anales de mecánica de la fractura , vol. 22, pp. 27-34, 2005.

PERAZZO, F.; KNOP, F.; MASCARÓ, P.; PLACENCIA, G.: “Modelación numérica de la tasa y el patrón de desgaste abrasivo mediante el método de elementos discretos”, Mecánica Computacional, 34: 1013-1026, 2016.

PÉREZ, R.E.A.; MUÑOZ, T.G.E.; SOUZA, M.R.; NEGRÍN, H.L.I.: “Simulación de un sistema tribológico formado por sustrato recubrimiento rugoso usando métodos numéricos”, Ingeniería Mecánica, 17(1): 48-56, 2014, ISSN: 1815-5944.

RAMADHANI, B.W.: FEM Modelling and Simulation of Production Casing with Local Wear Damage, [en línea], Stavanger University, Master’s thesis, Norway, 2018, Disponible en:Disponible en:https://brage.bibsys.no/xmlui/handle/11250/2570231 , [Consulta: 5 de enero de 2019].

RAMALHO, A.: “A geometrical model to predict the wear evolution of coated surfaces”, Wear, 264(9-10): 775-780, 2008, ISSN: 0043-1648.

RECAREY, M.C.A.; OÑATE, E.; MIGUEL, J.; ROJEK, J.; ZARATE, F.; (primero): Simulación de problemas de desgaste en la interacción herramienta de corte terreno empleando el Método de los Elementos Discretos, Inst. Universidad Central de las Villas, Santa Clara, Villa Clara, Cuba, 25 p., 2001.

SÁNCHEZ, I.A.L.; HERRERA, S.M.; RECAREY, M.C.A.; IGLESIAS, C.C.: “Bases teóricas para la simulación del desgaste de los órganos de trabajo de los aperos de labranza mediante el Método de los Elementos Distintos (MED)”, Revista Ciencias Técnicas Agropecuarias, 23(2): 81-88, 2014, ISSN: 1010-2760, e-ISSN: 2071-0054.

SÁNCHEZ, I.A.L.; RECAREY, M.C.A.; HERRERA, S.M.: “Simulación del desgaste en 3D durante la interacción herramienta de corte-terreno mediante el Método de los Elementos Discretos (MED)”, Revista Ciencias Técnicas Agropecuarias, 18(1): 27-31, 2009, ISSN: 1010-2760, e-ISSN: 2071-0054.

SAUCEDO, D.J.J.: Análisis del desgaste en engranes aplicando el Método de Elementos Finitos, Universidad Autónoma de Querétaro, MSc. Thesis (Mecatrónica), Querétaro, México, 2014.

STRANSK, J.; JIRASÉK, M.: “Open source FEM-DEM coupling”, En: 18th International Conference Engineering Mechanics, Svratka, Czech Republic, May 14 - 17, vol. Paper # 12012, Svratka, Czech Republic, pp. 1237-1251, 2012.

SUN, G.; SUI, T.; KORSUNSKY, A.M.: “Review of the hybrid finite-discrete element method (FDEM)”, En: The World Congress on Engineering , June 29 - July 12, vol. 2, London, U. K, 2016.

TAFOREL, P.; RENOUF, M.; DUBOIS, F.; VOIVRET, J.C.: “Finite element-discrete element coupling strategies for the modelling of ballast-soil interaction”, International Journal of Railway Technology, ser. hal-01279251, 4(2): 73-95, 2015, DOI: 10.4203/ijrt.4.2.4.

XIE, L.-J.; SCHMIDT, J.; SCHMIDT, C.; BIESINGER, F.: “2D FEM estimate of tool wear in turning operation”, Wear, 258(10): 1479-1490, 2005, ISSN: 0043-1648, DOI: 10.1016/j.wear.2004.11.004.

ZEGATTI, M.: Estudo da Influência do Desgaste na Falha Prematura de Componentes de Linhas de Ancoragem, Universidade de Brasília, Departamento de Engenharia Mecânica, Mestrado em Ciências Mecânicas, Brasília, DF, Brasil, 128 p., 2016.

ZUO, S.; NI, T.; WU, X.; WU, K.; YANG, X.: “Prediction procedure for wear distribution of transient rolling tire”, International Journal of Automotive Technology, 15(3): 505-515, 2014, ISSN: 1229-9138, DOI: 10.1007/s12239-014-0053-3.

Most read articles by the same author(s)