Behavior of Operating Indicators of Massey Fergunson 5650 Grain Harvester

Article Sidebar

PDF PDF (Español (España)) EPUB XML-JATS HTML
Published: Oct 12, 2018
Keywords:
Productivity, reliability, time balance, technical availability coefficient

Main Article Content

Claudio B. Pérez-Olmo
Universidad de Ciego de Ávila Máximo Gómez Baez
Yarina Trujillo-Rodríguez
Universidad de Ciego de Ávila Máximo Gómez Baez
Antonio Daquinta-Gradaille
Universidad de Ciego de Ávila Máximo Gómez Baez
Raúl Gutiérrez-Torres
Universidad de Ciego de Ávila Máximo Gómez Baez
Elena Plá-Rodríguez
Universidad de Ciego de Ávila Máximo Gómez Baez

Abstract

Due to the high cost of Massey Fergunson 5650 grain harvesters, proper use of these machines is necessary. In Ciego de Ávila Province, with many areas dedicated to the cultivation of grains, these machines have a wide use. The work consisted of evaluating the balance of shift time of the harvesters, technical availability coefficient, the most frequent failures and productivity and agricultural yield of the fields. The coefficient of technical availability 0.82, still has the potential to improve the use of machines and it is possible to take technical and organizational measures. The most frequent faults were in the cutting system and in the harvest system. The productivity of the harvesters with an average of 1.6 t / h was low considering the potential of these machines. The main causes of this poor performance are given by low effective use of shift time (average 69%), low agricultural yields (average of 1.15 t / ha) and inadequate state of the fields for harvesting.

Article Details

How to Cite
Pérez-Olmo, C. B., Trujillo-Rodríguez, Y., Daquinta-Gradaille, A., Gutiérrez-Torres, R., & Plá-Rodríguez, E. (2018). Behavior of Operating Indicators of Massey Fergunson 5650 Grain Harvester. Revista Ciencias Técnicas Agropecuarias, 27(4). Retrieved from https://revistas.unah.edu.cu/index.php/rcta/article/view/1015
Issue
Vol. 27 No. 4 (2018): Future Issue
Section
Original Articles

Those authors that have publications with this journal accept the following terms:

1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

• The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.

3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).

References

CAMPOS, C. R.; CORRÊA, C. P.; FERNANDES, S. L.; BAPTESTINI, M.F.; COSTA, F. C.; BUSTOS, D. J.: “Bean grain hysteresis with induced mechanical damage”, Revista Brasileira de Engenharia Agrícola e Ambiental, 20(10): 930–935, 2016, ISSN: 1807-1929.

CASSIA, T. M.; VOLTARELLI, A. M.; DA SILVA, P. R.; ZERBATO, C.; LIMA, H. P.: “Monitoramento da operação de colheita mecanizada de sementes de soja.”, Revista Brasileira de Engenharia Agricola e Ambiental-Agriambi, 19(12), 2015, ISSN: 1807-1929.

CHACÓN, A.: “El espaciamiento entre surcos: efecto sobre el rendimiento agrícola, sus componentes y el peso de 100 semillas de dos cultivares de soya [Glycine max(L.) Merr.]”, Revista Centro Agrícola, 38(3): 45-49, 2012, ISSN: 0253-5785.

DE LA CRUZ, A.; MIRANDA, C. A.; SHKILIOVA, L.; ABREU, F. O.; RIBET, M. Y.: “Análisis de la disponibilidad técnica de la cosechadora de arroz CLAAS DOMINATOR 130”, Avances, 15(4): 385–393, 2013, ISSN: 1562–3297.

GONZÁLEZ, R. D.; HERNÁNDEZ, G. A.A.; SHKILIOVA, L.: “Adaptabilidad de tractores Maxxum Case 150 y New Holland TM-7010 para operaciones de mantenimiento técnico”, Revista Ciencias Técnicas Agropecuarias, 26(2): 23–30, 2017, ISSN: 1010-2760, E-ISSN: 2071-0054.

HERRERA, G. E.; MIRANDA, C. A.; OLIVET, R. Y.: “Investigación de la mantenibilidad en cosechadoras de arroz New Holland L-521, L-624, L-626 durante los mantenimientos técnicos en la unidad empresarial de Base Agrícola Sierra Maestra”, Revista Ingeniería Agrícola, 4(3): 9-15, 2012, ISSN: 2306-1545, E-ISSN: 2227-8761.

IGLESIAS, C. C.E.; MOREJÓN, M. Y.; LLANES, R.: “Determinación de la composición racional del complejo cosecha-transporte del arroz con la aplicación de la Teoría del Servicio Masivo en el Complejo Agroindustrial Arrocero Los Palacios”, Revista Ciencias Técnicas Agropecuarias, 21(2): 24–29, 2012, ISSN: 1010-2760, E-ISSN: 2071-0054.

MAQUEIRA, L. L.A.; TORRES, W. de la N.; ROJAN, H. O.; PÉREZ, M. S.A.; TOLEDO, D.: “Respuesta del crecimiento y rendimiento de cuatro cultivares de soya Glycine max.(L.) Merril) durante la época de frío en la localidad de Los Palacios”, Cultivos Tropicales, 37(4): 98–104, 2016, ISSN: 0258-5936.

MIRANDA, C. A.; CASTELLS, H. S.; FERNÁNDEZ, A. O.; SANTOS, S. F.; IGLESIAS, C. C.E.: “Análisis de la utilización del tiempo de turno por las cosechadoras arroz CLAAS DOMINATOR”, Revista Ciencias Técnicas Agropecuarias, 22(4): 27–31, 2013, ISSN: 1010-2760, E-ISSN: 2071-0054.

MIRANDA, C. A.; PANEQUE, R. P.; ABRAHAN, F. N.; RIBET, M. Y.; SANTOS, G. F.: “Determinación del costo energético de la cosecha mecanizada del arroz”, Revista Ciencias Técnicas Agropecuarias, 25(4): 32–38, 2016, ISSN: 1010-2760, E-ISSN: 2071-0054.

MIRANDA, C. A.; SHKILIOVA, L.; CASTELLS, H. S.; LARA, H. Y.; RIBET, M. Y.: “Determinación del coeficiente de fiabilidad de explotación en su variante cronométrica y de costo para cosechadoras CLAAS Dominator”, Revista Ciencias Técnicas Agropecuarias, 24(3): 35–38, 2015, ISSN: 1010-2760, E-ISSN: 2071-0054.

MOREIRA, G. B.; PEGORARO, R. F.; VIEIRA, N.; BORGES, I.; KONDO, M. K.: “Desempenho agronômico do feijoeiro com doses de nitrogênio em semeadura e cobertura.”, Revista Brasileira de Engenharia Agricola e Ambiental-Agriambi, 17(8): 818–823, 2013, ISSN: 1807-1929.

PÉREZ, L. C.; MIRANDA, C. A.; PEDRERA, I. N.; IGLESIAS, C. C.E.; CASTELLS, H. S.: “Evaluación de la calidad de cosecha de la cosechadora New Holland TC57”, Avances, 16(4): 381–390, 2014, ISSN: 1562–3297.

SHKILIOVA, L.; FERNÁNDEZ, S. M.: “Sistemas de Mantenimiento Técnico y Reparaciones y su aplicación en la Agricultura”, Revista Ciencias Técnicas Agropecuarias, 20(1): 72–77, 2011, ISSN: 1010-2760, E-ISSN: 2071-0054.

UTTARO, N. F.; MIRANDA, C. A.; MOREJÓN, M. Y.: “Análisis de la disponibilidad técnica de la cosechadora CaseAustoft 7000 en el Estado Trujillo, Venezuela”, Revista Ingeniería Agrícola, 5(1): 3–7, 2015, ISSN: 2306-1545, E-ISSN: 2227-8761.