Structural Evaluation of an Agricultural Trailer Axle Subjected to Impact Loads
Main Article Content
Abstract
Article Details
Those authors that have publications with this journal accept the following terms:
1. They will retain their copyright and guarantee the journal the right of first publication of their work, which will be simultaneously subject to the License Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) that allows third parties to share the work whenever its author is indicated and its first publication this journal. Under this license the author will be free of:
• Share — copy and redistribute the material in any medium or format
• Adapt — remix, transform, and build upon the material
• The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• NonCommercial — You may not use the material for commercial purposes.
• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
2. The authors may adopt other non-exclusive license agreements to distribute the published version of the work (e.g., deposit it in an institutional telematics file or publish it in a monographic volume) whenever the initial publication is indicated in this journal.
3. The authors are allowed and recommended disseminating their work through the Internet (e.g. in institutional telematics archives or on their website) before and during the submission process, which can produce interesting exchanges and increase the citations of the published work. (See the Effect of open access).
References
FLORES, M.R.; MARTÍNEZ, R.A.; DÁVILA G, A. Determinación de propiedades físico-mecánicas del material componente de un neumático de tractor. Revista Ciencias Técnicas Agropecuarias, 19(3): 57-61, 2010a, ISSN: 2071-0054.16.
FLORES, M.R.; MARTÍNEZ, R.A.; VALERIO, P.S.G.; ABADÍA, S.R.; LENIN, V.; DÁVILA, G.A.I.: “Análisis de neumático por elementos finitos con vistas a la determinación de coeficientes de cargas dinámicas en estructuras de máquinas agrícolas”, Revista Ciencias Técnicas Agropecuarias, 19(4): 10-16, 2010b, ISSN: 1010-2760, e-ISSN: 2071-0054. 16.
GIN, B.C.; MANIKANDAN, P.: “Low velocity impact response of fibre-metal laminates-A review”, Composite Structures, 107: 363-381, 2014, ISSN: 0263-8223, DOI: 10.1016/j.compstruct.2013.08.003.
KONG, Y.S.; ABDULLAH, S.; OMAR, M.Z.; HARIS, S.M.: “Failure assessment of a leaf spring eye design under various load cases”, Engineering Failure Analysis, 63: 146-159, 2016, ISSN: 1350-6307, DOI: https://doi.org/10.1016/j.engfailanal.2016.02.017.
KUMAR, K.; AGGARWAL, M.L.: “Optimization of Various Design Parameters for EN45A Flat Leaf Spring”, Materials Today: Proceedings, 4(2): 1829-1836, 2017, ISSN: 2214-7853, DOI: https://doi.org/10.1016/j.matpr.2017.02.026.
LEE, H.J.; GARD, K.: “Vehicle-soil interaction: testing, modeling, calibration and validation”, Journal of Terramechanics, 52: 9-21, 2014, ISSN: 0022-4898, DOI: https://doi.org/10.1016/j.jterra.2013.12.001.
LI, Z.; DICECCO, S.; ALTENHOF, W.; THOMAS, M.; BANTING, R.; HU, H.: “Stress and fatigue life analyses of a five-piece rim and the proposed optimization with a two-piece rim”, Journal of Terramechanics, 52: 31-45, 2014, ISSN: 0022-4898.
MARTÍNEZ, R.A.; FLORES, M.R.; SAMÁ, M.J.: “Influencia de la masa del cuerpo impactado sobre los coeficientes de cargas dinámicas calculados por métodos tradicionales”, Revista Ciencias Técnicas Agropecuarias, 18(2): 22-26, 2009, ISSN: 1010-2760, e-ISSN: 2071-0054.
PANEQUE, R.P.; LÓPEZ, C.G.; MAYANS, C.P.; MUÑOZ, G.F.; GAYTÁN, R.J.G.; ROMANTCHIK, K.E.: Fundamentos Teóricos y Análisis de Máquinas Agrícolas, Ed. Universidad Autónoma Chapingo, vol. 1, Chapingo, Texcoco, México, 456 p., 2018, ISBN: 978-607-12-0532-2.
REINA, G.; MILELLA, A.; GALATI, R.: “Terrain assessment for precision agriculture using vehicle dynamic modelling”, Biosystems engineering, 162: 124-139, 2017, ISSN: 1537-5110, DOI: https://doi.org/10.1016/j.biosystemseng. 2017.06.025.
ROMERO, J.A.; LOZANO, G.A.A.; OBREGÓN, B.S.A.; BETANZO, Q.E.: “A plane model of the interaction of a vehicle with the road infrastructure”, Advances in Engineering Software, 117: 46-58, 2018, ISSN: 0965-9978, DOI: https://doi.org/10.1016/j.advengsoft.2017.03.007.
SINGH, N.K.; SINGH, K.K.: “Review on impact analysis of FRP composites validated by LS‐DYNA”, Polymer Composites, 36(10): 1786-1798, 2015, ISSN: 0272-8397, DOI: 10.1002/pc.23064.
UNTAROIU, D.C.; YUE, N.; SHIN, J.: “A finite element model of the lower limb for simulating automotive impacts”, Annals of biomedical engineering, 41(3): 513-526, 2013, ISSN: 0090-6964, DOI: 10.1007/s10439-012-0687-0.
XU, L.; ZHAI, W.: “Stochastic analysis model for vehicle-track coupled systems subject to earthquakes and track random irregularities”, Journal of Sound and Vibration, 407: 209-225, 2017, ISSN: 0022-460X, DOI: https://doi.org/10.1016/j.jsv.2017.06.030.